EL5001 pdf datasheet (6-Channe

The EL5001 is a 6-channel level shifting driver designed
primarily for use as a clock driver in LTPS LCD displays. The
EL5001 buffers and level shifts six logic level input signals.
The six channels are grouped in to two sets, one of two
channels and one of four channels. Each set can be
configured in the inverting or non-inverting modes.
Operating from 3.3V input logic, the output swing is set using
two reference input pins. These pins can be up to 18V
differential and are not buffered, so should therefore be
bypassed effectively.
The EL5001 is designed to drive capacitive loads of 500pF
with rise and fall times of just 20ns. A three-state pin is
provided to set all outputs in to a high impedance mode. The
ENABLE pin can be used to put the device in to a power
save mode where the power consumption drops to just 3μA.
The EL5001 is available in 20-pin QFN (4mm x 4mm) and
HTSSOP packages. Both are specified for operation over
the -40°C to +85°C temperature range.