EL1529 pdf datasheet (Dual Cha

The EL1529 is to be used with Globespan's G7566-850 CO
chipset for high performance long reach and high speed
applications, including ADSL2, ADSL2+, G.Span, and
G.Span+.
The EL1529 is an integral part of the signal chain. The driver
has been optimized for flat gain response and reduced
harmonic distortion and noise in the bands of interest to
improve the overall signal to noise in the system.
These drivers achieve a total harmonic distortion (THD)
measurement of typically -70dB @ 1.1MHz, while
consuming typically 5mA per DSL channel of total supply
current. This supply current can be set using a resistor on
the IADJ pin. Two other pins (C0 & C1) can also be used to
adjust supply current to one of four pre-set modes (full-IS,
3/4-IS, 1/2-IS, and full power-down). The EL1529 operates
on ±5V to ±12V supplies and retains its bandwidth and
linearity over the complete supply range.
The device is supplied in the small footprint