资料介绍
Table of Contents
AD7303 IIO DAC Linux Driver
Supported Devices
Evaluation Boards
Description
This is a Linux industrial I/O (IIO) subsystem driver, targeting single-channel serial interface DACs. The industrial I/O subsystem provides a unified framework for drivers for many different types of converters and sensors using a number of different physical interfaces (i2c, spi, etc). See IIO for more information.
Source Code
Status
Files
Function | File |
---|---|
driver | drivers/iio/dac/ad7303.c |
Example platform device initialization
Devicetree
Required devicetree properties:
- compatible: Needs to be “adi,” followed by the name of the device. E.g. “adi,ad5541a”
- reg: The chipselect number used for the device
- spi-max-frequency: Maximum SPI clock frequency
- Vdd-supply: VDD voltage supply regulator
Optional devicetree properties:
- REF-supply: external reference voltage supply regulator. This should only be set if there is an external reference voltage connected to the REF pin. If not set, Vdd/2 is used as the reference voltage.
dac_vdd: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "fixed-supply"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; }; axi_spi_0: spi@42000000 { #address-cells = <1>; #size-cells = <0>; compatible = "xlnx,axi-spi-1.02.a", "xlnx,xps-spi-2.00.a"; ... ad7303@0 { compatible = "adi,ad7303"; reg = <0>; spi-max-frequency = <1000000>; Vdd-supply = <&dac_vdd>; }; };
Driver testing
Each and every IIO device, typically a hardware chip, has a device folder under /sys/bus/iio/devices/iio:deviceX. Where X is the IIO index of the device. Under every of these directory folders reside a set of files, depending on the characteristics and features of the hardware device in question. These files are consistently generalized and documented in the IIO ABI documentation. In order to determine which IIO deviceX corresponds to which hardware device, the user can read the name file /sys/bus/iio/devices/iio:deviceX/name. In case the sequence in which the iio device drivers are loaded/registered is constant, the numbering is constant and may be known in advance.
This specifies any shell prompt running on the target
root:/> cd /sys/bus/iio/devices/ root:/sys/bus/iio/devices> ls iio:device0 root:/sys/bus/iio/devices> cd iio/:device0 root:/sys/bus/iio/devices/iio:device0> ls -l drwxr-xr-x 2 root root 0 Jul 5 05:10 buffer -r--r--r-- 1 root root 4096 Jul 5 05:10 dev -r--r--r-- 1 root root 4096 Jul 5 05:10 name -rw-r--r-- 1 root root 4096 Jul 5 05:10 out_voltage0_powerdown -rw-r--r-- 1 root root 4096 Jul 5 05:10 out_voltage0_raw -rw-r--r-- 1 root root 4096 Jul 5 05:10 out_voltage1_powerdown -rw-r--r-- 1 root root 4096 Jul 5 05:10 out_voltage1_raw -rw-r--r-- 1 root root 4096 Jul 5 05:10 out_voltage_scale drwxr-xr-x 2 root root 0 Jul 5 05:10 power drwxr-xr-x 2 root root 0 Jul 5 05:10 scan_elements lrwxrwxrwx 1 root root 0 Jan 1 1970 subsystem -> ../../../../../../../bus/iio drwxr-xr-x 2 root root 0 Jul 5 05:10 trigger -rw-r--r-- 1 root root 4096 Jan 1 1970 uevent
Show device name
This specifies any shell prompt running on the target
root:/sys/bus/iio/devices/iio:device0> cat name ad7303
Show scale
Description:
scale to be applied to out_voltage0_raw and out_voltage1_raw in order to obtain the measured voltage in millivolts.
This specifies any shell prompt running on the target
root:/sys/bus/iio/devices/iio:device0> cat out_voltage_scale 12.890625
Set channel Y output voltage
Description:
/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
Raw (unscaled, no bias etc.) output voltage for channel Y.
This specifies any shell prompt running on the target
root:/sys/bus/iio/devices/iio:device0> echo 100 > out_voltage0_raw
U = out_voltage0_raw * out_voltage_scale = 100 * 12.890625 mV = 1289.0625 mV
Enable power down mode on output Y
/sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
Description:
Writing 1 causes output Y to enter the power down mode. Clearing returns to normal operation.
This specifies any shell prompt running on the target
root:/sys/bus/iio/devices/iio:device0> echo 1 > out_voltage0_powerdown root:/sys/bus/iio/devices/iio:device0> cat out_voltage0_powerdown 1 root:/sys/bus/iio/devices/iio:device0> echo 0 > out_voltage0_powerdown root:/sys/bus/iio/devices/iio:device0> cat out_voltage0_powerdown 0
- AD5449 IIO DAC Linux驱动程序 3次下载
- AD5380 IIO多通道Linux驱动程序DAC 8次下载
- AD7291 IIO ADC Linux驱动程序 3次下载
- AD5064 IIO四通道Linux驱动程序DAC 5次下载
- AD5421 IIO DAC Linux驱动程序 2次下载
- AD5360 IIO多通道Linux驱动程序DAC 7次下载
- AD5446 IIO DAC Linux驱动程序 7次下载
- AD5764 IIO四通道Linux驱动程序DAC 2次下载
- AD5624 IIO四通道Linux驱动程序DAC 7次下载
- IIO单通道串行ADC Linux驱动程序 4次下载
- AD9834 IIO直接数字合成Linux驱动程序 1次下载
- AD9832 IIO直接数字合成Linux驱动程序 3次下载
- AD7998 IIO ADC Linux驱动程序 14次下载
- AD7887 IIO ADC Linux驱动程序 6次下载
- AD5677R NanDAC+IIO Linux驱动程序 12次下载
- 怎么编写Framebuffer驱动程序 66次阅读
- 基于V4L技术和摄像头的Linux驱动程序的设计与实现 2621次阅读
- 如何写一个Linux设备驱动程序 4018次阅读
- digilent4通道8位数字模拟输出介绍 1580次阅读
- 米尔科技LINUX设备驱动程序教程 1781次阅读
- 嵌入式Linux内核的驱动程序开发是怎样的 1284次阅读
- 浅谈电脑驱动程序的工作原理 详解电脑驱动程序意义 2.8w次阅读
- 基于嵌入式Linux内核的系统设备驱动程序开发设计 1031次阅读
- 基于Linux2.6.30开发DS18B20的驱动程序的类型和文件操作接口函数详解 1262次阅读
- 可动态安装的Linux设备驱动程序 882次阅读
- 如何用嵌入式Linux系统编写键盘驱动 1222次阅读
- 8255A驱动程序 2868次阅读
- 8155驱动程序 2784次阅读
- Xilinx设备的驱动程序 7711次阅读
- PCI驱动程序开发实例 6506次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1491次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 95次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 11次下载 | 免费
- 6100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 7基于单片机和 SG3525的程控开关电源设计
- 0.23 MB | 4次下载 | 免费
- 8基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537793次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多