IMP809.pdf IMP810.pdf

3-Pin Microcontroller
Power Supply Supervisor
u Embedded controllers
u Battery operated systems
u Intelligent instruments
u Wireless communication systems
u PDAs and handheld equipment
u Improved Maxim MAX809/MAX810 replacement
— Lower supply current…6μA
— 80% lower maximum supply current
u Monitor 5V, 3.3V and 3V supplies
u 140ms min. reset pulse width
u Active-low reset valid with 1.1V supply
(IMP809)
u Small 3-pin SOT-23 package
u No external components
u Specified over full temperature range
— –40°C to 105°C
Block Diagrams
IMP809
(IMP810)
VCC
VCC
VCC
GND GND
RESET
(RESET)
809/10_01.eps
μP
RESET
Input
The IMP809/IMP810 are 3.0V, 3.3V and 5.0V power supply supervisor circuits
optimized for low-power microprocessor (μP), microcontroller (μC)
and digital systems. The IMP809/810 are improved drop-in replacements
for the Maxim MAX809/810 and feature 60% lower supply current.
A reset signal is issued if the power supply voltage drops below a preset
reset threshold and is asserted for at least 140ms after the supply has
risen above the reset threshold. The IMP809 has an active-low RESET
output that is guaranteed to be in the correct state for VCC down to 1.1V.
The IMP810 has an active-high RESET output. The reset comparator is
designed to ignore fast transients on VCC.
Low supply current makes the IMP809/IMP810 ideal for use in portable
and battery operated equipment. The IMP809/IMP810 are available in a
compact 3-pin SOT23 package.
Six voltage thresholds are available to support 3V to 5V systems: