2.7伏至5.5伏8/10/12位DAC的SPI接口在纳米lfcsp和SC70封装ad5601/ad5611/ad5621数据表

　　The AD5601/AD5611/AD5621， members of the nanoDAC® family， are single， 8-/10-/12-bit， buffered voltage output DACs that operate from a single 2.7 V to 5.5 V supply， consuming typically 75 μA at 5 V. The parts come in tiny LFCSP and SC70 packages. Their on-chip precision output amplifier allows railto-rail output swing to be achieved. The AD5601/AD5611/ AD5621 utilize a versatile 3-wire serial interface that operates at clock rates up to 30 MHz and is compatible with SPI， QSPI™， MICROWIRE™， and DSP interface standards. The reference for the AD5601/AD5611/AD5621 is derived from the power supply inputs and， therefore， gives the widest dynamic output range. The parts incorporate a power-on reset circuit， which ensures that the DAC output powers up to 0 V and remains there until a valid write to the device takes place. The AD5601/AD5611/AD5621 contain a power-down feature that reduces current consumption to typically 0.2 μA at 3 V. They also provide software-selectable output loads while in power-down mode. The parts are put into power-down mode over the serial interface. The low power consumption of these parts in normal operation makes them ideally suited to portable battery-operated equipment. The combination of small package and low power makes these nanoDAC devices ideal for level-setting requirements， such as generating bias or control voltages in space-constrained and power-sensitive applications.