SN75DP119,PDF(DisplayPort 1:1

The SN75DP119 is a 1-lane or 2-lane embedded DisplayPort (eDP) repeater that regenerates the DP high speed digital link. The device compensates for pcb related frequency loss and signal reflections. This is especially helpful in designs with long pcb traces or when there is a FET switch in the signal path.

Four levels of differential output voltage swing (V_OD) and any combination of pre-emphasis using these V_OD levels are supported. The output swing and pre-emphasis are configured through device control inputs. The available output swing levels are 300mV_PP, 400mV_PP, 600mV_PP or 750mV_PP. Therefore, the output pre-emphasis level can be configured to 0dB, 2.0dB, 2,5dB, 3.5dB, 5.5dB, 6dB, or 8dB. This is a good solution for embedded link applications, such as the connection from the GPU to the notebook internal panel.