LT1373 pdf datasheet (250kHz L

The LT®1373 is a low supply current high frequency
current mode switching regulator. It can be operated in all
standard switching configurations including boost, buck,
flyback, forward, inverting and “Cuk.” A 1.5A high efficiency
switch is included on the die, along with all oscillator,
control and protection circuitry. All functions of the
LT1373 are integrated into 8-pin SO/PDIP packages.
Compared to the 500kHz LT1372, which draws 4mA of
quiescent current, the LT1373 switches at 250kHz, typically
consumes only 1mA and has higher efficiency. High
frequency switching allows for small inductors to be used.
All surface mount components consume less than 0.6
square inch of board space.
New design techniques increase flexibility and maintain
ease of use. Switching is easily synchronized to an external
logic level source. A logic low on the shutdown pin
reduces supply current to 12mA. Unique error amplifier
circuitry can regulate positive or negative output voltage
while maintaining simple frequency compensation techniques.
Nonlinear error amplifier transconductance reduces
output overshoot on start-up or overload recovery.
Oscillator frequency shifting protects external components
during overload conditions.