资料介绍
This book is an outcome of a joint European project, SYDIC-Telecom
(SYstem Design Industry Council of European Telecom Industries). The
motivation of the participating companies to join their efforts was the agreed
observation that system design know-how, being one of their main assets,
cannot be reused and capitalized effectively enough today.
Challenges and problems are caused by the following development in the
industry:
System design, system architecting, intellectual property, reuse.
Abstract:
Key words:
1. MOTIVATION
Fast evolution of product properties, e. g. more functionality and
diversity, requiring managing of product families, more effort needed
to design the new, complex functionality, more designers involved in
design projects, etc.
Fast evolution of technologies, requiring frequent adaptations of the
methodology.
New application domains appearing, requiring novel use of designer
expertise.
Decreasing time-to-market (TTM) despite increased functionality,
diversity and complexity.
1.
2.
3.
4.
Chapter 1
The authors of this book are well aware that there is quite a lot of
material in this book and that different types of readers are likely to be
interested in specific sections of the book. Consequently we recognize need
to give some practical advise where to put the focus based on the
background of the reader. In the following we identify typical classes of
readers and suggest them a reading flow.
The first type is a reader who wants to get an overall picture of the topics
of the book and who is not necessarily very familiar with the domain. Such a
reader is advised to follow the course of presentation. When reading Chapter
4, it is useful to frequently refer to Annex A5.
The second type is an industrial product development practitioner, such
as a system engineer or a system architect. In this case Chapters 2 and 3 do
not probably bring much new information and can be skipped or browsed
lightly. Reading Chapter 4 is necessary for understanding the rest of the
book, so it should not be skipped although it appears rather theoretical.
Annex A5 helps digesting Chapter 4. Chapter 5 may or may not be of
interest, depending on how much the reader is using design languages.
However, we believe that Chapters 6, 7 and 8 are the most interesting ones
for an industrial system developer.
The third type is a person responsible of methodology development
and/or product development process improvement in a company. Similarly
as above, Chapters 2 and 3 can be browsed lightly. Chapter 4 is the most
important for a methodology developer. We believe that the System Design
Process Model (SDPM) can be directly applied as a metamodel for process
definition purposes. Likewise, the model of System Under Design (SUDM)
can be used as a metamodel for methodology development, e.g. for the
definition of UML profiles. Chapter 5 and especially Annex A3 give a useful
2 Chapter 1
5. Demand for decreasing cost in the market encountering price erosion.
Adding the fact that it today is very difficult to reuse existing knowledge,
the industry is faced with an increasing and serious problem: lack of
experienced system designers.
The results of the project presented in this book are meant to provide the
foundation to improve the product development capabilities of companies to
cope with the above challenges. For this we need a system level design
methodology with reuse of know-how. This can also open new business
opportunities for providers of such know-how, i.e. a market for system
design Intellectual Property (in the following called 'IP').
- SVPWM仿真模型资源下载 32次下载
- 含风电并网系统的鲁棒区间优化调度模型 10次下载
- 综合能源系统优化模型及其研究分析 19次下载
- 基于DDPG算法的智能车汇流模型 7次下载
- 车联网环境中混合车流的车辆换道行为决策模型 13次下载
- 可检测实时系统的正确性的符号化模型 6次下载
- 基于迁移学习的驾驶分心行为识别模型 10次下载
- 流域重金属生态风险评估系统模型综述 4次下载
- AltaRica3.0模型到NuSMVP模型的转换规则和算法 4次下载
- 基于预训练模型和长短期记忆网络的深度学习模型 19次下载
- 贝叶斯网络模型之一依赖估测器模型研究 12次下载
- 基于主题模型和变分自编器的自适应知识方法 5次下载
- DFA与SVM相结合的流量识别DFA-SVM模型 8次下载
- 基于单点多步博弈的功防网络防御模型 9次下载
- RapidIO应用系统及其验证模型的设计与测试 38次下载
- 广西IP转播车全速前行,转播系统进入新时代! 482次阅读
- 如何采用SPICE模型加密 694次阅读
- 什么是TCP/IP协议 1998次阅读
- 服务器Linux系统配置IP地址的方法 7904次阅读
- 基于Internet远程测控的关键技术及应用分析 4727次阅读
- 基于IP桥接技术实现密码算法多IP核集成的应用方案设计 3358次阅读
- 采用EP1C20芯片和S698IP核实现平台计算机的设计 1022次阅读
- 采用FPGA器件实现GPS数据加密系统中机载模块中DES IP的设计 1353次阅读
- 浅谈IP地址分配与中继设备 1224次阅读
- 为什么企业都开始更替为IP通讯系统IP通讯系统可以带来什么价值 3073次阅读
- 基于模型的高级电机控制系统设计详解 3734次阅读
- TCP/IP协议典型的优化原则和方法 1775次阅读
- 基于FPGA的并行硬件ECC模型的设计 5230次阅读
- 教你如何将车联网与IP视频系统相结合 1938次阅读
- 在测控系统中用IP核实现D/A转换 911次阅读
下载排行
本周
- 1东芝BiCD集成电路硅单片TB67S109AFNAG数据手册
- 1.93 MB | 5次下载 | 免费
- 2SP3060A/30120A/30160A/30320A/30520A系列数字合成扫频仪使用说明书
- 4.16 MB | 3次下载 | 1 积分
- 3具有双通道 DC-DC转换器、由串行接口控制的9通道电机驱动器TPIC2010数据表
- 1.15MB | 2次下载 | 免费
- 4USB Type-C PD快充协议智能触发芯片FS312B数据手册
- 0.75 MB | 1次下载 | 免费
- 5USB Type_C PD快充协议智能触发芯片FS8025B数据手册
- 1.29 MB | 1次下载 | 免费
- 6触摸按键PCB 设计要点V01
- 1.42 MB | 1次下载 | 免费
- 75V升压充电两串锂电池充电管理IC FS4058数据手册
- 2.98 MB | 次下载 | 免费
- 8真关断同步升压IC FS2009数据手册
- 2.08 MB | 次下载 | 免费
本月
- 1DCDC原理详解
- 0.98 MB | 65次下载 | 免费
- 2allegro快速入门教程
- 1.98 MB | 36次下载 | 免费
- 3FU-7(807)胆机原理图
- 11.93 MB | 25次下载 | 1 积分
- 4用于汽车应用的高压电源管理IC TPS65311-Q1数据表
- 1.05MB | 22次下载 | 免费
- 5电子元件基础知识介绍
- 8.76 MB | 15次下载 | 2 积分
- 6华为海思Ascend 310芯片的资料说明
- 0.12 MB | 10次下载 | 10 积分
- 7GD32F10x系列MCU用户手册
- 11.5MB | 9次下载 | 免费
- 86A 输出电流同步降压稳压器TPS65286数据表
- 2.05MB | 6次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935083次下载 | 免费
- 2开源硬件-PMP21529.1-4 开关降压/升压双向直流/直流转换器 PCB layout 设计
- 1.48MB | 420045次下载 | 免费
- 3Altium DXP2002下载入口
- 未知 | 233067次下载 | 免费
- 4电路仿真软件multisim 10.0免费下载
- 340992 | 191308次下载 | 免费
- 5十天学会AVR单片机与C语言视频教程 下载
- 158M | 183308次下载 | 免费
- 6labview8.5下载
- 未知 | 81567次下载 | 免费
- 7Keil工具MDK-Arm免费下载
- 0.02 MB | 73785次下载 | 免费
- 8NI LabVIEW中实现3D视觉的工具和技术
- 未知 | 70088次下载 | 免费
评论
查看更多