资料介绍
可重用机床编码技术及重构算法研究:摘要:在产品开发过程中80%的设计工作是在重用的基础上进行的。设计重用能够缩短产品开发周期、降低设计成本和避免重复性错误。本文从可重用机床的模块分析入手,详细分析了可重用机床的组成模块特征,进而将可重用机床的模块编码系统分为模块主码、模块接口特征码和模块图纸管理码三部分组成。通过计算总相似系数得到与目标模块最接近的模块,给出了可重用机床模块选择算法的流程,并以可重用机床中的横梁为例进行了验证。
关键词:可重用机床;编码技术;重构算法
Machine design reusable coding technology and reconstruction algorithm
Huang Fang1,2, Wang Jingkun3
(1 Institute of Network Information Security,Shandong University,Jinan 250001,
China;2 Department of Computer Science and Technology,Shandong Agricultural
Administrators’ College,Jinan 250001,China;3 School of Mechanical Engineering,
Shandong University, Jinan 250061, China)
Abstract: 80 percent of the design work was carried out on the reusable basis during
the product development process. Design reuse can shorten the product development
cycle, reduce design costs and avoid duplication errors. Reusable modules of the
machine tools were analysis firstly in this paper, and then the characteristics of
composition modules for the reusable machine were detailed. The module coding system
of the reusable machine was made up of three parts: the main module code, the module
interface module code and drawing management group code. The module which was found
by calculating the similarity coefficients was the nearest module to the target
module. The reusable machine module selection algorithm processes were given in this
paper, and the reusable beams in the machine as an example was validated.
Key Words: reusable machine; coding technology; reconstruction algorithm
关键词:可重用机床;编码技术;重构算法
Machine design reusable coding technology and reconstruction algorithm
Huang Fang1,2, Wang Jingkun3
(1 Institute of Network Information Security,Shandong University,Jinan 250001,
China;2 Department of Computer Science and Technology,Shandong Agricultural
Administrators’ College,Jinan 250001,China;3 School of Mechanical Engineering,
Shandong University, Jinan 250061, China)
Abstract: 80 percent of the design work was carried out on the reusable basis during
the product development process. Design reuse can shorten the product development
cycle, reduce design costs and avoid duplication errors. Reusable modules of the
machine tools were analysis firstly in this paper, and then the characteristics of
composition modules for the reusable machine were detailed. The module coding system
of the reusable machine was made up of three parts: the main module code, the module
interface module code and drawing management group code. The module which was found
by calculating the similarity coefficients was the nearest module to the target
module. The reusable machine module selection algorithm processes were given in this
paper, and the reusable beams in the machine as an example was validated.
Key Words: reusable machine; coding technology; reconstruction algorithm
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- 基于无监督稀疏自编码的图像哈希算法 32次下载
- 基于哈夫曼编码的密文域可逆信息隐藏算法 13次下载
- 复杂软件系统重构技术研究综述 8次下载
- 机床热误差的来源、获取方法及优化方法等 28次下载
- 一种编码解码模式的肺分割算法 11次下载
- 基于离散化正交匹配追踪的中继混合预编码算法 29次下载
- 基于FPGA的动态可重构图像融合算法研究 13次下载
- 压缩感知的理论框架和应用的系统概述和信号重构算法研究 8次下载
- 单电流检测电阻三相电流重构算法中所述算法调整所需的步骤和设置 38次下载
- 基于网络编码的确定性逐层构造算法 1次下载
- 基于保守扩充理论的模块化本体重用 0次下载
- 可视化重构RFID中间件研究 22次下载
- 可重用机床编码技术及重构算法研究 26次下载
- 基于Legendre矩的多阈值二值图像重构算法 15次下载
- 可重用机床编码技术及重构算法研究 32次下载
- 信息编码技术详解 227次阅读
- 基于分形图像编码改进算法提高分形编码的速度和压缩比 1782次阅读
- 基于底层实现和上层逻辑对可重构系统任务间通信进行研究 3434次阅读
- 数控机床的定义_数控机床有何优点 3880次阅读
- 采用ARM和CPLD结构的检测系统可重构设计方法 2023次阅读
- 基于多元LDPC码迭代编码算法的混合校验矩阵构造算法 4419次阅读
- 方向图可重构天线及其相控阵研究详细教程 5121次阅读
- 数控机床进给系统设计_数控机床进给传动系统的组成_数控机床进给传动系统作用 6861次阅读
- 数控机床plc编程详解 1.6w次阅读
- 哈夫曼编码原理详解及应用实例,哈夫曼编码算法流程图 12.2w次阅读
- 可重构技术分析及动态可重构系统设计 1.2w次阅读
- 基于89c54的远程动态可重构技术原理及实现方法 1184次阅读
- JPEG2000 MQ编码算法的优化和FPGA实现 2964次阅读
- 普通机床精度是多少?机床精度的定义是什么?机床精度保持方法分享 4.1w次阅读
- 配电网络重构的改进混合遗传算法 1080次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1491次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 93次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 11次下载 | 免费
- 6100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 7基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
- 8基于单片机的红外风扇遥控
- 0.23 MB | 3次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537791次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多