基于嵌入式调试器的网络通信方法设计与实现

本文介绍了在嵌入式调试器中如何通过以太网口进行嵌入式软件调试，实现了主机与开发板之间的网口通信。针对具体的嵌入式开发板S3C4510B 对网口驱动和网络协议进行了研究，裁减了网口驱动和网络协议的冗余部分，既保证了调试器可以通过以太网进行远程调试，又能满足嵌入式系统对资源占用的要求。
关键词：嵌入式开发板；网络协议；嵌入式调试器

Design and Implementation of Ethernet Communication Method Based on Embedded Debugger WangWenjie, LuanXin (College of Information Science and Engineering, Ocean University of China, Qingdao 266071) Abstract: This paper introduces how to debug embedded software by Ethernet interface in the embedded debugger. The network communication between the host computer and the board has been implemented. To study the Ethernet driver and network protocol is aimed at the embedded board S3C4510B, and the redundant part has been deleted. This implementation both insures the remote debugging by Ethernet and satisfies the request that the embedded system calls for the embedded resources.
Key words: embedded board; network protocol; embedded debugger