pstat监视网络来往包

监视网络来往包，纪录收到的包，需要pcap支持，可工作在windows和linux下。

可根据对方端口和ip来过滤，过滤方式有包含和不包含两种方式可选，纪录方式有裸数据、流量和文本。

本程序可用来做端口流量统计，或者详细的web请求日志，用于事后分析。

用法:
  pstat [-f ] [-i ] [-d ] [-e] [-g ] [-n mode] [-i ]  [-d ] 
        [-v] [-x ] [-C] [-p] [-w] [-B ] [-A ] [-c ] [-s ]

Options:
[--interface|-i]    | Input interface name (numeric/symbolic)
                                    | or pcap file path
[--data-dir|-d]               | Data directory (must be writable).
                                    | Default: data
[--daemon|-e]                       | Daemonize pstat
[--dump-timeline|-C]                | Enable timeline dump.
[--pid|-G]                    | Pid file path
[--kill|-k]                         | Kill Daemon
[--packet-filter|-B]        | Ingress packet filter (BPF filter)
[--snaplen|-s]      | capture length,if length less then 1,set to 128(default:128)
[--output-mode|-A]            | Setup data output mode:
                                    | bit 0(1) - set 1 to Enable detail file output(default 1)
                                    | bit 1(2) - set 1 to Enable minute sum output(default 0)
                                    | bit 2(4) - set 1 to Enable raw data output(default 0)
[--local-networks|-m]   | Local net ip (default: 192.168.1.2)
[--filter-ip|-c]        | add ip to be ingored,16 max can be added
[--host-mode|-w]                    | treat filter ip to C class net(default no)
[--filter-port|-p]                  | add port into list to be watch,16 max can be added
[--block-mode|-n]                   | how to used port and ip list, block mod is 1, pass mode is 0:
                                    | bit 0(1) - port list  mode (default 0 )
                                    | bit 1(2) - ip list  mode (default 1)
[--rid-line|-x]               | set to 1 to get rid of lines in content(default 0)
[--defaults-file|-f]     | Use the specified defaults file
[--verbose|-v]                      | Verbose tracing
[--help|-h]                         | Help