高效时代，是时候过渡到自动化测试了>>>>>>

homebridge-shinobi

A Homebridge plugin integrating Shinobi for motion detector cameras

Installation

1. Install Homebridge using: npm install -g homebridge
2. Install this plugin: npm install -g homebridge-shinobi
3. Update your configuration file. See a sample config.json snippet below.
4. Ensure ffmpeg is installed and on the path.

NOTE: Currently there is no support for streaming audio from a camera.

Configuration

Example config.json entry:

"platforms": [
    {
        "platform": "Shinobi",
        "shinobi_api": "http://x.x.x.x:8080",
        "api_key": "xxx",
        "group_key": "house",
        "monitors": [
            {
                "monitor_id": "front"
            },
            {
                "monitor_id": "rear"
            }
        ],
        "web_hook_port": "8443",
        "https_key_path": "/cert/privkey.pem",
        "https_cert_path": "/cert/fullchain.pem"
    }
]

Where:

• shinobi_api is the base URL for the Shinobi API
• api_key is the Shinobi API key (configured in the Shinobi dashboard API menu)
• group_key is a Shinobi group key
• monitors contains a list of monitors consisting of:
  • monitor_id
• web_hook_port is the port that the platform should listen on for motion event webhooks from Shinobi

If both https_key_path and https_cert_path are configured to point at HTTPS key and cert files available on the Homebridge server the webhook server will be hosted on HTTPS.

Shinobi Integration

The specified shinobi_api and api_key will be used to make all Shinobi API requests.

Each of the specified monitor IDs will be used with the specified group_key to add a new accessory to the platform consistent of a Motion Sensor service and camera.

When viewing video, the plugin will use the information returned from the API for a specific Monitor to determine the source video stream configured. FFmpeg is used to stream directly from the camera and forward to HomeKit. If possible, the video will not be re-encoded.

Snapshot images for each Monitor are simply pulled from the Shinobi API.

A webhook URL should be configured for each Monitor within the Shinobi 'Global Detector Settings' with the following format:

http[s]://>:?mid=&group=

For example, assuming the Homebridge instance is available at 192.168.1.10 and using the above sample config, the two Monitors front and rear would have webhook URLs configured as:

https://192.168.1.10:8443?mid=front&group=house

and

https://192.168.1.10:8443?mid=rear&group=house

Help etc.

If you have a query or problem, raise an issue in GitHub, or better yet submit a PR!