资料介绍
开发工具包加速亚千兆赫项目
德克萨斯仪器CC1110迷你开发工具包是一种价格低廉、功能齐全的开发工具包,提供了一个低功耗的sub-GHz开始快速(868至915兆赫)的无线项目。
CC1110迷你开发工具包(见图1)是专为无线报警和安全系统的快速原型、工业监控应用中,无线传感器网络。该套件包括两smartrfcc1110-868靶板;一个转换板和电缆CC调试器;的评估版本ew8051 IAR嵌入式工作台;和一个PCB天线预先ETSI和FCC标准。用户手册甚至建议您可以通过切换电阻器的位置来添加自己的外部天线。使用附带的源代码和格伯的文件,很容易将这些板转化为现实世界的应用,其中德克萨斯仪器显然已经认真考虑。
本文将研究测试板的操作和性能,以及进行范围测试,这产生了一些令人吃惊的结果。
The kit comes with two boards pre-programmed with a test link that operates at 868.3 MHz using GFSK modulation at a bit rate of 2.4 kbps. The link test establishes point-to-point communication between the master and slave mode using TI‘s SimpliciTI protocol.
To run the link test, after powering up each board, press the master button on one board and the slave button on the other. Each board contains red and green LEDs, with the blinking pattern indicating their status. Within a few minutes of opening the box, the link test was up and running. Once the link is established, the master sends packets to the slave and waits 250 ms for acknowledgment. The slave remains in receive mode except to transmit acknowledgement packets back to the master. The whole cycle with the preprogrammed link test takes about 1.3 seconds, though the data rate, timing, and power can all be changed by recompiling the source code and reflashing the chip. TI provides the full source code for this application, which developers can easily modify using the IAR Embedded Workbench and the CC debugger, both of which are included with the kit. Reflashing requires downloading the SmartRF Flash Programmer and testing requires the SmartRF Studio. Both are free.
- 使用QuickFeather开发工具包和SensiML 0次下载
- MG74PG1X08开发工具包 2次下载
- MG32F10x系列开发工具包 2次下载
- MG32x02z系列开发工具包 1次下载
- 示例项目单击此处查看使用开发工具包的项目示例 6次下载
- LTC2937-软件开发工具包 6次下载
- 新的开发工具:RN52 Bluetooth®音频评估工具包 4次下载
- 低引脚数USB开发工具包的介绍项目实验入门和原理图的资料概述 1次下载
- PIC32通用入门工具包开发工具的详细中文资料概述 12次下载
- 如何使用KEELOQ3开发工具包作为开发工具来在目标板上仿真和调试固件 35次下载
- 如何将MCP2210评估工具包作为开发工具使用的详细中文资料概述 48次下载
- 如何使用高性能工具包作为开发工具在目标板上仿真和调试固件 9次下载
- PSoC 3/5 平台开发工具包 5次下载
- 开发工具包启动了IoT的能量收集设计 10次下载
- STM32F10xxx USB开发工具包 107次下载
- 配置Ubuntu系统环境和安装的开发工具 529次阅读
- 图形界面开发工具GUI Guider的使用教程 3233次阅读
- NPOI WEG报表工具包简介 411次阅读
- Intellij IDEA 开发工具实例 445次阅读
- Arm®ML处理器 嵌入式评估工具包介绍 1487次阅读
- 六款程序员必看的前端在线开发工具 2504次阅读
- 米尔科技Keil开发工具所有支持芯片介绍 1.6w次阅读
- 米尔科技ARM DS-5开发工具介绍 1158次阅读
- 米尔科技ARM DS-5 官方开发工具介绍 1635次阅读
- firefly NCC S1--MDK - SSD模型工具包介绍 1855次阅读
- 一款获得Amazon认证的领先音频前端开发工具包 4329次阅读
- web前端开发工具排行:8款html开发工具推荐下载 8.4w次阅读
- 图解android开发工具 1275次阅读
- 抢攻数据中心 赛灵思发布OpenCL开发工具 1066次阅读
- SoPC应用设计的PLD开发工具要求详解 1648次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 6次下载 | 免费
- 3100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 4嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 5基于FPGA的光纤通信系统的设计与实现
- 0.61 MB | 2次下载 | 免费
- 6基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 751单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33564次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21548次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6653次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537796次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191185次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183278次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多