电子发烧友App

硬声App

0
  • 聊天消息
  • 系统消息
  • 评论与回复
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心

完善资料让更多小伙伴认识你,还能领取20积分哦,立即完善>

3天内不再提示
电子发烧友网>电子资料下载>电源技术>Buck-Boost Controller Simplifi

Buck-Boost Controller Simplifi

2009-09-23 | rar | 433 | 次下载 | 免费

资料介绍

Buck-Boost Controller Simplifi es Design of DC/DC Converters for Handheld Products:A number of conventional solutions have been available for
the design of a DC/DC converter where the output voltage
is within the input voltage range—a common scenario
in Li-Ion battery-powered applications—but none were
very attractive until now. Conventional topologies, such
as SEPIC or boost followed by buck, have numerous
disadvantages, including low effi ciency, complex magnetics,
polarity inversion and/or circuit complexity/cost. The
LTC®3785 buck-boost controller yields a simple, effi cient,
low parts-count, single-converter solution that is easy
to implement, thus avoiding the drawbacks associated
with traditional solutions.
High Effi ciency Controller Capabilities
The LTC3785 serves applications requiring input and
output voltages in the range of 2.7 to 10V—ideal for
applications powered from one or two Li-Ion cells or
multiple cell NiMH, NiCad or Alkaline batteries. It supports
a single inductor, 4-switch, buck-boost topology, which is
ideal for an output voltage that is within the input voltage
range. The high level of integration yields a simple, low
parts-count solution. The LTC3785 provides for currentlimit
and shutdown in all modes of operation (which is
not normally available with boost converters).
Very high effi ciency is achieved by synchronous rectifi
cation, high side drive (allowing the use of N-channel
MOSFETs), RDS(ON) current sensing, and Burst Mode®
operation for effi cient light load operation. Protection
features include soft-start, overvoltage, undervoltage
and foldback current-limit with burp-mode or latch-off
for extended faults.
3.3V, 3A Converter Operates from 2.7V – 10V Source
The circuit shown in Figure 1 utilizes the LTC3785 controller
to produce a synchronous, 4-switch, buck-boost
design. It provides a fi xed 3.3V, 3A output from a 2.7V
– 10V input. It is short-circuit protected: the controller
offers a choice of recycling or latch-off protection for
severe overload faults.
下载该资料的人也在下载 下载该资料的人还在阅读
更多 >

评论

查看更多

下载排行

本周

  1. 1TC358743XBG评估板参考手册
  2. 1.36 MB  |  330次下载  |  免费
  3. 2开关电源基础知识
  4. 5.73 MB  |  6次下载  |  免费
  5. 3100W短波放大电路图
  6. 0.05 MB  |  4次下载  |  3 积分
  7. 4嵌入式linux-聊天程序设计
  8. 0.60 MB  |  3次下载  |  免费
  9. 5基于FPGA的光纤通信系统的设计与实现
  10. 0.61 MB  |  2次下载  |  免费
  11. 651单片机窗帘控制器仿真程序
  12. 1.93 MB  |  2次下载  |  免费
  13. 751单片机大棚环境控制器仿真程序
  14. 1.10 MB  |  2次下载  |  免费
  15. 8基于51单片机的RGB调色灯程序仿真
  16. 0.86 MB  |  2次下载  |  免费

本月

  1. 1OrCAD10.5下载OrCAD10.5中文版软件
  2. 0.00 MB  |  234315次下载  |  免费
  3. 2555集成电路应用800例(新编版)
  4. 0.00 MB  |  33564次下载  |  免费
  5. 3接口电路图大全
  6. 未知  |  30323次下载  |  免费
  7. 4开关电源设计实例指南
  8. 未知  |  21549次下载  |  免费
  9. 5电气工程师手册免费下载(新编第二版pdf电子书)
  10. 0.00 MB  |  15349次下载  |  免费
  11. 6数字电路基础pdf(下载)
  12. 未知  |  13750次下载  |  免费
  13. 7电子制作实例集锦 下载
  14. 未知  |  8113次下载  |  免费
  15. 8《LED驱动电路设计》 温德尔著
  16. 0.00 MB  |  6653次下载  |  免费

总榜

  1. 1matlab软件下载入口
  2. 未知  |  935054次下载  |  免费
  3. 2protel99se软件下载(可英文版转中文版)
  4. 78.1 MB  |  537796次下载  |  免费
  5. 3MATLAB 7.1 下载 (含软件介绍)
  6. 未知  |  420026次下载  |  免费
  7. 4OrCAD10.5下载OrCAD10.5中文版软件
  8. 0.00 MB  |  234315次下载  |  免费
  9. 5Altium DXP2002下载入口
  10. 未知  |  233046次下载  |  免费
  11. 6电路仿真软件multisim 10.0免费下载
  12. 340992  |  191185次下载  |  免费
  13. 7十天学会AVR单片机与C语言视频教程 下载
  14. 158M  |  183279次下载  |  免费
  15. 8proe5.0野火版下载(中文版免费下载)
  16. 未知  |  138040次下载  |  免费