资料介绍
Introduction The purpose of a transimpedance circuit is to convert an input current from a current source (typically a photodiode) into an output voltage. The simplest method to achieve this conversion is to use a resistor connected to ground. However, the achievable gain using this method is limited by the following factors: 1. The current source input impedance; 2. The load impedance; and 3. Desired bandwidth. A closed-loop approach, using an operational amplifier, is normally beneficial to most applications as it has the potential of eliminating those issues. A typical circuit with all necessary components for this analysis is shown in Figure 1. In this circuit, the generator is a photodiode, whose role is to convert the photons into a current. This current is then amplified by the feedback resistor RF 。 Working with an ideal amplifier for now, we can see that because no bias current is present, all the signal generated by the photodiode is going to be converted to the output. Note that the source impedance is not of interest here; it is isolated from the output. Note also that the output is low impedance, allowing a wide variety of load to be connected. The bandwidth is going to be a function of the source capacitance (CS), the feedback capacitance (CF ), and the gain bandwidth product of the actual amplifier used.
- 功率放大器如何选型 18次下载
- 高速放大器ths3001pcb模块 43次下载
- 浅析采用高速运算放大器进行低失真设计 10次下载
- 浅析放大器中的源电阻和噪声考虑因素 10次下载
- 高速低压单电源运算放大器MCP6024规格书 14次下载
- 放大器的电源电阻和噪声考虑因素 5次下载
- 高速放大器选择表 14次下载
- AN47-高速放大器技术 11次下载
- 你好,放大器电子版资源下载 0次下载
- 高速放大器选型表 5次下载
- 420MHz 高速电路反馈放大器 6次下载
- 运算放大器结构 2次下载
- 视频_高速放大器设计指南 第十六版 0次下载
- 放大器的电源电阻和噪声考虑因素 0次下载
- 放大器的电源电阻和噪声考虑因素 1次下载
- 共源共栅放大器电路图分享 494次阅读
- 放大器自激了怎么办? 221次阅读
- 仪表放大器和差分放大器的区别 502次阅读
- 全差分放大器的评估 841次阅读
- 单端至差分放大器设计技巧 986次阅读
- 单端至差分放大器设计技巧 919次阅读
- 如何保护非放大器 290次阅读
- 揭秘自稳零放大器:应用考虑因素 498次阅读
- 跨阻放大器噪声考虑因素 1340次阅读
- ADI、TI、圣邦微高速运算放大器产品介绍 6606次阅读
- 高速放大器振荡的最常见原因盘点 避免你走更多的弯路 2219次阅读
- 运放的反相放大器_反相放大器原理介绍 4.3w次阅读
- 差分放大器的原理,和差分放大器的应用 2.1w次阅读
- 高速运算放大器型号选择 1.4w次阅读
- 两级共射极放大器组成的宽频放大器 4308次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1489次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 91次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 9次下载 | 免费
- 6基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
- 7基于单片机和 SG3525的程控开关电源设计
- 0.23 MB | 3次下载 | 免费
- 8基于单片机的红外风扇遥控
- 0.23 MB | 3次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30319次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537791次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233045次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多