电子发烧友App

硬声App

0
  • 聊天消息
  • 系统消息
  • 评论与回复
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心

完善资料让更多小伙伴认识你,还能领取20积分哦,立即完善>

3天内不再提示
电子发烧友网>电子资料下载>电源技术>PIC18F4550_PWM_FUNCTIONS

PIC18F4550_PWM_FUNCTIONS

2014-06-12 | pdf | 5KB | 次下载 | 3积分

资料介绍

PWM FUNCTIONS 
Original by F.Zia, rewritten for the PIC18F4550 by M.F.v.Lieshout, March 2006 
Information sources: 
The information in this document is obtained from the following Microchip manuals: 
- PIC18F4550 Datasheet 
- PICmicro® 18C MCU Family Reference Manual 
- MPLAB C18 C Compiler Libraries 
Function Prototypes: 
For a detailed description of these functions, please see: 
Section 2.7 Pulse-Width Modulation Functions, in MPLAB C18 C Compiler Libraries manual. 
 
The PIC18F4550 has 2 PWM channels available, so x is 1 or 2 in this case. 
 
#include  
void OpenPWMx ( char PR2 ); // Configure PWM channel x. 
void SetDCPWMx ( unsigned int dutycycle ); // Write a new duty cycle value to 
PWM channel x. 
void ClosePWMx ( void ); // Disable PWM channel x. 
Notes: 
1. PR2 can be any value from 0x00 to 0xff. This value determines the PWM frequency by 
using the following formula: 
PWM period =[(PR2) + 1] x 4 x TOSC x TMR2 prescaler 
2. The value of dutycycle can be any 10-bit number. Only the lower 10-bits of dutycycle are 
written into the duty cycle registers. The duty cycle determines the high time of the PWM 
waveform. 
3. PWM uses TIMER2 for time base. In addition to opening the PWM, TIMER2 must also be 
opened with an OpenTimer2(...) statement before the PWM will operate. See the other 
manual for the timer functions. 
4. TIMER2 postscaler is not used in the determination of the PWM frequency. TIMER2 
postscaler could be used to generate TMR2 interrupts at a different frequency than the PWM 
output. 
5. On the PIC18F4550, also an enhanced PWM can be used. The enhanced PWM can be 
used for motor driving: half-bridge and full-bridge (forward and reverse). See the MPLAB C18 
C Compiler Libraries manual for the functions. 
下载该资料的人也在下载 下载该资料的人还在阅读
更多 >

评论

查看更多

下载排行

本周

  1. 1TC358743XBG评估板参考手册
  2. 1.36 MB  |  330次下载  |  免费
  3. 2开关电源基础知识
  4. 5.73 MB  |  6次下载  |  免费
  5. 3100W短波放大电路图
  6. 0.05 MB  |  4次下载  |  3 积分
  7. 4嵌入式linux-聊天程序设计
  8. 0.60 MB  |  3次下载  |  免费
  9. 5基于FPGA的光纤通信系统的设计与实现
  10. 0.61 MB  |  2次下载  |  免费
  11. 651单片机窗帘控制器仿真程序
  12. 1.93 MB  |  2次下载  |  免费
  13. 751单片机大棚环境控制器仿真程序
  14. 1.10 MB  |  2次下载  |  免费
  15. 8基于51单片机的RGB调色灯程序仿真
  16. 0.86 MB  |  2次下载  |  免费

本月

  1. 1OrCAD10.5下载OrCAD10.5中文版软件
  2. 0.00 MB  |  234315次下载  |  免费
  3. 2555集成电路应用800例(新编版)
  4. 0.00 MB  |  33564次下载  |  免费
  5. 3接口电路图大全
  6. 未知  |  30323次下载  |  免费
  7. 4开关电源设计实例指南
  8. 未知  |  21549次下载  |  免费
  9. 5电气工程师手册免费下载(新编第二版pdf电子书)
  10. 0.00 MB  |  15349次下载  |  免费
  11. 6数字电路基础pdf(下载)
  12. 未知  |  13750次下载  |  免费
  13. 7电子制作实例集锦 下载
  14. 未知  |  8113次下载  |  免费
  15. 8《LED驱动电路设计》 温德尔著
  16. 0.00 MB  |  6653次下载  |  免费

总榜

  1. 1matlab软件下载入口
  2. 未知  |  935054次下载  |  免费
  3. 2protel99se软件下载(可英文版转中文版)
  4. 78.1 MB  |  537796次下载  |  免费
  5. 3MATLAB 7.1 下载 (含软件介绍)
  6. 未知  |  420026次下载  |  免费
  7. 4OrCAD10.5下载OrCAD10.5中文版软件
  8. 0.00 MB  |  234315次下载  |  免费
  9. 5Altium DXP2002下载入口
  10. 未知  |  233046次下载  |  免费
  11. 6电路仿真软件multisim 10.0免费下载
  12. 340992  |  191185次下载  |  免费
  13. 7十天学会AVR单片机与C语言视频教程 下载
  14. 158M  |  183279次下载  |  免费
  15. 8proe5.0野火版下载(中文版免费下载)
  16. 未知  |  138040次下载  |  免费