资料介绍
NEO-M8N-0-01、NEO-M8N-0-10官方详细资料整理打包,外加U-center测试软件,以及关于GPS模块的电路参考图
1 Introduction
This document provides important software-related information for customers when migrating from u-blox 7 to u-blox 8 or u-blox M8 FW SPG3.01 based products. Although most of the receiver features remain unchanged, some new ones have been added and some older ones revised or altered. These changes are reflected in alteration or addition to the u-blox message protocol and an extended range of NMEA sentences. Note that all the features described below are applicable to the u-blox 8 and u-blox-M8 devices except in the satellite constellations allowed. The M8 is a concurrent multi-GNSS receiver that can be configured to receive combinations of GPS, SBAS, QZSS, Galileo, GLONASS and BeiDou. The u-blox 8 is similar to the u-blox 7 in that it can be configured to receive GPS plus SBAS and QZSS or GLONASS signals only.
For the u-blox 8 / M8 devices the assistance messages for AssistNow Offline and Online service have been overhauled to work effectively with all supported constellations. Also, the AssistNow Autonomous function adds support for all the major GNSS constellations. The major software and operational changes are summarized as follows:
· NMEA default version is now 4.0; 4.1, 2.3, and 2.1 can be enabled
· Multiple GNSS assistance with the MGA AssistNow services
· GeoFence capability added
· UBX message integrity mechanism
· A new wrist mounted platform dynamical model for arm-swing mitigation
· New Power Save Modes
· Anti spoofing measures provided
· Odometer function for trip and total distance plus a Low Speed COG filter (intended for marine use)
· Reference for time pulse and time mark switched to UTC instead of GPS
· Operation with the Japanese Indoor MEssaging System (IMES)
As a quick reference, this document lists the basic message changes and then expands on these to provide some background information on the features that have been introduced or changed with this generation of Firmware. For a fuller explanation and description of the u-blox 8 / M8 capabilities, customers are directed to the u-blox 8 / u-blox M8 Receiver Description Including Protocol Specification [1]。
- 常用电路模块整理 35次下载
- MOS管常见相关知识整理资料下载 17次下载
- 四大移动运营商频段划分整理资料下载 6次下载
- 模数转换器(ADC)知识整理与讲解资料下载 185次下载
- 整理了一套用三极管、二极管、电阻组成的逻辑门电路资料下载 6次下载
- AVR常用库函数整理,收藏备用资料下载 17次下载
- PCB设计:快速整理PCB元器件位号资料下载 18次下载
- BOM表没有规格描述,如何快速整理资料下载 6次下载
- Altium-Designert题目答案整理(完整版) 0次下载
- PCB电路板字典整理 0次下载
- 步进电机资料整理 41次下载
- I2C整理资料 2次下载
- 自己整理的3G手机的相关资料 17次下载
- 硬件电路经验整理 217次下载
- CF卡mp3方案资料(需自己整理) 35次下载
- 硬件电路设计规范 550次阅读
- 超全的电路图字母符号及释义整理汇总 1w次阅读
- 电路符号整理大全 6273次阅读
- Linux指令的详细整理 1823次阅读
- 2019年最新的C语言基础知识合集整理 3653次阅读
- Linux常用命令的全拼整理 4424次阅读
- 最全锂电资料大全PPT版 6168次阅读
- 芯片反向设计的流程图整理 9983次阅读
- 射频电路板设计知识整理 6070次阅读
- 混联电路的简易整理方法详解 1.5w次阅读
- AD转换设计中的基本问题整理 1.3w次阅读
- 对AI芯片的厂商进行归纳和整理 3571次阅读
- 电流源电路 howland电流源电路 2.2w次阅读
- LA4225电路图资料 1w次阅读
- la4275电路图资料 4898次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 6次下载 | 免费
- 3100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 4嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 5基于FPGA的光纤通信系统的设计与实现
- 0.61 MB | 2次下载 | 免费
- 6基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 751单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33564次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21548次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6653次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537796次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191185次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183278次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多