资料介绍
LPM Quick Reference Guide
December 1996
LPM Features
The primary objective for the LPM is to enable architecture-independent
design without sacrificing efficiency. The LPM meets the following key
criteria:
n
Architecture-independent design entry
—Designers can work with LPM
functions during design entry and verification without specifying the
target architecture. Design entry and simulation tools remain
architecture-independent, relying on the synthesis or fitting tools to
efficiently map the design to various architectures.
n
Efficient design mapping
—The LPM allows designers to create
architecture-independent designs without sacrificing efficiency. The
IC vendor is responsible for the mapping of LPM functions; thus,
optimum solutions are guaranteed.
n
Tool-independent design entry
—The LPM enables designers to migrate
designs between EDA tools while maintaining a high-level logic
description of the functions. For example, designers can use one
vendor’s tool for logic synthesis and another vendor’s tool for logic
simulation.
n
Specification of a complete design
—LPM functions completely specify
the digital logic for any design. Designers can create new functions
with LPM functions.
LPM Functions
The LPM presently contains 25 functions. Despite its small size, the LPM
can duplicate the functionality of other design libraries that contain many
more functions; each function contains parameters that allow it to expand
in many dimensions. For example, the
lpm_counter
function allows the
user to create counters with widths ranging from 1 to 256 bits.
In addition to width, the user can specify the features and functionality of
the counter. For example, parameters indicate whether the counter counts
up or down, or loads synchronously or asynchronously. Thus, the single
lpm_counter
function can replace over thirty 74-series counters
- ZSSC41xx SSC 评估板 Reference Guide 0次下载
- ZSSC41xx SSC 评估板 Reference Guide 0次下载
- 快速开始指南:TSL2521_EVM_QG001002_1-00.pdf 4次下载
- 快速开始指南:TMD2712_QG000164_1-00.pdf 4次下载
- 快速开始指南:AS39513_QG000114_1-00.pdf 4次下载
- 使用FPGA实现LPM ROM创建的教程说明 16次下载
- U-Boot.Quick.Reference 8次下载
- MAPS-KS22F256_Quick_Start_Guide 16次下载
- TMS320x2833x_System_Control_and_Interrupts_Reference_Guide 39次下载
- TMS320x281x_DSP_Boot_ROM_Reference_Guide 19次下载
- TMS320x28xx_DSP_Peripheral_Reference_Guide 11次下载
- Pocket Guide to Signal Sources 17次下载
- Antenna Reference Guide 8次下载
- Instantiating LPM in VHDL 26次下载
- LPM(参数化)库介绍-MaxplusII使用技巧 0次下载
- QUIC协议的特性、原理及应用场景 1469次阅读
- SpringBoot使用Sa-Token-Quick-Login插件实现快速登录认证 806次阅读
- petalinux安装过程 2055次阅读
- LabVIEW的编程之道—Quick Drop-隐藏控件 2847次阅读
- Qt Quick开发工具总结 1404次阅读
- User Guide for the HUSB238 USB PD Sink Reference Design Board 7989次阅读
- 在贴片加工厂中有哪些安全防护需要了解 1197次阅读
- 复合放大器实现高精度的高输出驱动能力 获得最佳的性能 1467次阅读
- 用降压型稳压器或线性稳压器电源时值来会为负载供电 872次阅读
- MSP单片机实现P3.0方波输出的设计 2326次阅读
- AVR单片机外部中断实例及下载烧录的方法 1986次阅读
- 如何针对涂鸦识别问题构建基于RNN的识别器 3418次阅读
- 利用来自于Quick Draw游戏的数百万涂鸦训练该神经网络 3175次阅读
- MSP430单片机按键中断程序 7482次阅读
- USB Type-C和Quick Charge概览 2501次阅读
下载排行
本周
- 1TC358743XBG评估板参考手册
- 1.36 MB | 330次下载 | 免费
- 2开关电源基础知识
- 5.73 MB | 11次下载 | 免费
- 3嵌入式linux-聊天程序设计
- 0.60 MB | 3次下载 | 免费
- 4DIY动手组装LED电子显示屏
- 0.98 MB | 3次下载 | 免费
- 5基于FPGA的C8051F单片机开发板设计
- 0.70 MB | 2次下载 | 免费
- 651单片机窗帘控制器仿真程序
- 1.93 MB | 2次下载 | 免费
- 751单片机PM2.5检测系统程序
- 0.83 MB | 2次下载 | 免费
- 8基于51单片机的RGB调色灯程序仿真
- 0.86 MB | 2次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 2555集成电路应用800例(新编版)
- 0.00 MB | 33566次下载 | 免费
- 3接口电路图大全
- 未知 | 30323次下载 | 免费
- 4开关电源设计实例指南
- 未知 | 21549次下载 | 免费
- 5电气工程师手册免费下载(新编第二版pdf电子书)
- 0.00 MB | 15349次下载 | 免费
- 6数字电路基础pdf(下载)
- 未知 | 13750次下载 | 免费
- 7电子制作实例集锦 下载
- 未知 | 8113次下载 | 免费
- 8《LED驱动电路设计》 温德尔著
- 0.00 MB | 6656次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935054次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537798次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420027次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234315次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191186次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183279次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138040次下载 | 免费
评论
查看更多