资料介绍
Introduction
The systems part of this Recommendation | International Standard addresses the combining of one or more elementary
streams of video and audio, as well as other data, into single or multiple streams which are suitable for storage or
transmission. Systems coding follows the syntactical and semantic rules imposed by this Specification and provides
information to enable synchronized decoding of decoder buffers over a wide range of retrieval or receipt conditions.
System coding shall be specified in two forms: the Transport Stream and the Program Stream. Each is optimized for a
different set of applications. Both the Transport Stream and Program Stream defined in this Recommendation |
International Standard provide coding syntax which is necessary and sufficient to synchronize the decoding and
presentation of the video and audio information, while ensuring that data buffers in the decoders do not overflow or
underflow. Information is coded in the syntax using time stamps concerning the decoding and presentation of coded
audio and visual data and time stamps concerning the delivery of the data stream itself. Both stream definitions are
packet-oriented multiplexes.
The basic multiplexing approach for single video and audio elementary streams is illustrated in Figure Intro. 1. The
video and audio data is encoded as described in ITU-T Rec. H.262 | ISO/IEC 13818-2 and ISO/IEC 13818-3. The
resulting compressed elementary streams are packetized to produce PES packets. Information needed to use PES
packets independently of either Transport Streams or Program Streams may be added when PES packets are formed.
This information is not needed and need not be added when PES packets are further combined with system level
information to form Transport Streams or Program Streams. This systems standard covers those processes to the right
of the vertical dashed line.
The systems part of this Recommendation | International Standard addresses the combining of one or more elementary
streams of video and audio, as well as other data, into single or multiple streams which are suitable for storage or
transmission. Systems coding follows the syntactical and semantic rules imposed by this Specification and provides
information to enable synchronized decoding of decoder buffers over a wide range of retrieval or receipt conditions.
System coding shall be specified in two forms: the Transport Stream and the Program Stream. Each is optimized for a
different set of applications. Both the Transport Stream and Program Stream defined in this Recommendation |
International Standard provide coding syntax which is necessary and sufficient to synchronize the decoding and
presentation of the video and audio information, while ensuring that data buffers in the decoders do not overflow or
underflow. Information is coded in the syntax using time stamps concerning the decoding and presentation of coded
audio and visual data and time stamps concerning the delivery of the data stream itself. Both stream definitions are
packet-oriented multiplexes.
The basic multiplexing approach for single video and audio elementary streams is illustrated in Figure Intro. 1. The
video and audio data is encoded as described in ITU-T Rec. H.262 | ISO/IEC 13818-2 and ISO/IEC 13818-3. The
resulting compressed elementary streams are packetized to produce PES packets. Information needed to use PES
packets independently of either Transport Streams or Program Streams may be added when PES packets are formed.
This information is not needed and need not be added when PES packets are further combined with system level
information to form Transport Streams or Program Streams. This systems standard covers those processes to the right
of the vertical dashed line.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- ISO/IEC_FDIS_14443-3:2000(E) 14次下载
- iso13818-123中文 0次下载
- MPEG DVB 海报 22次下载
- MPEG ATSC 海报 10次下载
- ISO-IEC 14882:1998(E) 3次下载
- ISO/IEC JTC 1 N8281 18次下载
- iso iec 17025 pdf 标准 58次下载
- iso/iec 13818-1:2007 pdf 241次下载
- iso/iec 13818-2:2000 135次下载
- ISO/IEC 13818-7:2003(E) pdf 54次下载
- ISO/IEC 13818-4:1998(E) pdf 44次下载
- ISO/IEC 13818-3:1998(E) pdf 250次下载
- ISO/IEC 14496-14:2003(E) pdf 215次下载
- ISO/IEC 13818-7:2006(E) pdf 150次下载
- ISO IEC 13818-2标准中文版 0次下载
- ISO14443相关的协议 6324次阅读
- 采用slemens从站协议芯片实现PROFIBUS—DP现场总线的软硬件设计 1933次阅读
- 基于FPGA技术和微控制器实现将TS流数据转换为IP数据包的设计 3895次阅读
- AS3992与R2000对比 详解AS3992与R2000性能差异 1.1w次阅读
- 基于R2000芯片的读写器架构分析 浅谈R2000芯片之架构 1.7w次阅读
- 通用功能安全标准IEC 61508-3中的重要指南 6287次阅读
- ISO/IEC RFID应用技术标准概述 3636次阅读
- 解读IEC60529 防护等级标准的实际应用 1.2w次阅读
- ISO122型管脚图 2359次阅读
- ISO102,ISO106型管脚图 2921次阅读
- ISO102,ISO106型电路原理图 3234次阅读
- ISO102,ISO106型电路方块图 2224次阅读
- ISO120,ISO121管脚图 2986次阅读
- ISO120,ISO121功能块图 3071次阅读
- ISO120,ISO121电路原理图 3921次阅读
下载排行
本周
- 1东芝BiCD集成电路硅单片TB67S109AFNAG数据手册
- 1.93 MB | 5次下载 | 免费
- 2SP3060A/30120A/30160A/30320A/30520A系列数字合成扫频仪使用说明书
- 4.16 MB | 3次下载 | 1 积分
- 3具有双通道 DC-DC转换器、由串行接口控制的9通道电机驱动器TPIC2010数据表
- 1.15MB | 2次下载 | 免费
- 4USB Type-C PD快充协议智能触发芯片FS312B数据手册
- 0.75 MB | 1次下载 | 免费
- 5USB Type_C PD快充协议智能触发芯片FS8025B数据手册
- 1.29 MB | 1次下载 | 免费
- 6触摸按键PCB 设计要点V01
- 1.42 MB | 1次下载 | 免费
- 7DC-DC电路(Buck)的设计与仿真
- 0.60 MB | 1次下载 | 2 积分
- 85V升压充电两串锂电池充电管理IC FS4058数据手册
- 2.98 MB | 次下载 | 免费
本月
- 1DCDC原理详解
- 0.98 MB | 65次下载 | 免费
- 2allegro快速入门教程
- 1.98 MB | 36次下载 | 免费
- 3FU-7(807)胆机原理图
- 11.93 MB | 25次下载 | 1 积分
- 4用于汽车应用的高压电源管理IC TPS65311-Q1数据表
- 1.05MB | 22次下载 | 免费
- 5电子元件基础知识介绍
- 8.76 MB | 15次下载 | 2 积分
- 6华为海思Ascend 310芯片的资料说明
- 0.12 MB | 10次下载 | 10 积分
- 7GD32F10x系列MCU用户手册
- 11.5MB | 9次下载 | 免费
- 86A 输出电流同步降压稳压器TPS65286数据表
- 2.05MB | 6次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935083次下载 | 免费
- 2开源硬件-PMP21529.1-4 开关降压/升压双向直流/直流转换器 PCB layout 设计
- 1.48MB | 420045次下载 | 免费
- 3Altium DXP2002下载入口
- 未知 | 233067次下载 | 免费
- 4电路仿真软件multisim 10.0免费下载
- 340992 | 191308次下载 | 免费
- 5十天学会AVR单片机与C语言视频教程 下载
- 158M | 183308次下载 | 免费
- 6labview8.5下载
- 未知 | 81567次下载 | 免费
- 7Keil工具MDK-Arm免费下载
- 0.02 MB | 73785次下载 | 免费
- 8NI LabVIEW中实现3D视觉的工具和技术
- 未知 | 70088次下载 | 免费
评论
查看更多