--- 产品详情 ---
| DSP | 4 C66x |
| DSP MHz (Max) | 1000, 1200 |
| CPU | 32-/64-bit |
| Operating system | DSP/BIOS |
| Ethernet MAC | 10/100/1000 |
| PCIe | 2 PCIe Gen2 |
| Rating | Catalog |
| Operating temperature range (C) | -40 to 100, 0 to 85 |
- Four TMS320C66x DSP Core Subsystems at 1.00 GHz and 1.2GHz
- 153.6 GMAC/76.8 GFLOP @ 1.2GHz
- 32KB L1P, 32KB L1D, 1024KB L2 Per Core
- 2MB Shared L2
- Multicore Navigator and TeraNet Switch Fabric - 2 Tb
- Network Coprocessors- Packet Accelerator, Security Accelerator
- Four Lanes of SRIO 2.1 - 5 Gbaud Per Lane Full Duplex
- Two Lanes PCIe Gen2 - 5 Gbaud Per Lane Full Duplex
- HyperLink - 50Gbaud Operation, Full Duplex
- Ethernet MAC Subsystem - Two SGMII Ports w/ 10/100/1000 Mbps operation
- 64-Bit DDR3 Interface (DDR3-1600) - 8 GByte Addressable Memory Space
- Six Lane SerDes-Based Antenna Interface (AIF2) - Operating at up to 6.144 Gbps
- Hardware Coprocessors
- -Enhanced Coprocessor for Turbo Encoding
-Three Enhanced Coprocessors for Turbo Decoding
-Four Viterbi Decoders
-Three Fast Fourier Transform Coprocessors
-Bit Rate CoProcessor
-Two Receiver Accelerators for WCDMA
-Transmitt Accelerator for WCDMA
- -Enhanced Coprocessor for Turbo Encoding
- Four Rake Search Accelerators for Chip Rate Processing and Reed-Muller Decoding
- I2C Interface, 16 GPIO Pins, SPI Interface
- Eight 64-Bit Timers, Three On-Chip PLLs
The TMS320C6670 Multicore Fixed and Floating Point System on Chip is a member of the C66xx SoC family based on TI's new KeyStone Multicore SoC Architecture designed specifically for high performance applications such as software defined radio, emerging broadband and other communications segments. Integrated with four C66x CorePac DSPs, each core runs at 1.0 to 1.20 GHz enabling up to 4.8 GHz. Hardware acceleration provides a highly integrated, power efficient and easy to use platform for implementing a combination of multi-band, multi-standard waveforms, including proprietary air-interfaces. The C6670 platform is power efficient and easy to use. The C66x CorePac DSP is fully backward compatible with all existing C6000 family of fixed and floating point DSPs.
为你推荐
-
TI数字多路复用器和编码器SN54HC1512022-12-23 15:12
-
TI数字多路复用器和编码器SN54LS1532022-12-23 15:12
-
TI数字多路复用器和编码器CD54HC1472022-12-23 15:12
-
TI数字多路复用器和编码器CY74FCT2257T2022-12-23 15:12
-
TI数字多路复用器和编码器SN74LVC257A2022-12-23 15:12
-
TI数字多路复用器和编码器SN74LVC157A2022-12-23 15:12
-
TI数字多路复用器和编码器SN74ALS258A2022-12-23 15:12
-
TI数字多路复用器和编码器SN74ALS257A2022-12-23 15:12
-
TI数字多路复用器和编码器SN74ALS157A2022-12-23 15:12
-
TI数字多路复用器和编码器SN74AHCT1582022-12-23 15:12
-
如何利用运算放大器设计振荡电路?2023-08-09 08:08
-
【PCB设计必备】31条布线技巧2023-08-03 08:09
-
电动汽车直流快充方案设计【含参考设计】2023-08-03 08:08
-
Buck电路的原理及器件选型指南2023-07-31 22:28
-
100W USB PD 3.0电源2023-07-31 22:27
-
千万不要忽略PCB设计中线宽线距的重要性2023-07-31 22:27
-
基于STM32的300W无刷直流电机驱动方案2023-07-06 10:02
-
上新啦!开发板仅需9.9元!2023-06-21 17:43
-
参考设计 | 2KW AC/DC数字电源方案2023-06-21 17:43
-
千万不能小瞧的PCB半孔板2023-06-21 17:34