UCOS移植在MCU8051 LARGE模式的源代码下载
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 1
C51 COMPILER V7.50, COMPILATION OF MODULE OS_SEM
OBJECT MODULE PLACED IN .\OS_SEM.obj
COMPILER INVOKED BY: d:\Keil\C51\BIN\C51.EXE ..\UCOS_II\OS_SEM.C LARGE BROWSE DEBUG OBJECTEXTEND PRINT(.\OS_SEM.lst) OBJ
-ECT(.\OS_SEM.obj)
line level source
1 /*
2 *************************************************************
3 * uC/OS-II
4 * The Real-Time Kernel
5 * SEMAPHORE MANAGEMENT
6 *
7 * (c) Copyright 1992-2002, Jean J. Labrosse, Weston, FL
8 * All Rights Reserved
9 *
10 * File : OS_SEM.C
11 * By : Jean J. Labrosse
12 ***********************************************************
13 */
14
15 #ifndef OS_MASTER_FILE
16 #include "includes.h"
17 #endif
18
19 #if OS_SEM_EN > 0
/*
************************************************************
* ACCEPT SEMAPHORE
*
* Description: This function checks the semaphore to see if a resource is available or, if an event
* occurred. Unlike OSSemPend(), OSSemAccept() does not suspend the calling task if the
* resource is not available or the event did not occur.
*
* Arguments : pevent is a pointer to the event control block
*
* Returns : > 0 if the resource is available or the event did not occur the semaphore is
* decremented to obtain the resource.
* == 0 if the resource is not available or the event did not occur or,
* if 'pevent' is a NULL pointer or,
* if you didn't pass a pointer to a semaphore
*************************************************************
*/
#if OS_SEM_ACCEPT_EN > 0
INT16U OSSemAccept (OS_EVENT xdata *pevent)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
INT16U cnt;
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Validate 'pevent' */
return (0);
}
if (pevent->OSEventType != OS_EVENT_TYPE_SEM) { /* Validate event block type */
return (0);
}
#endif
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 2
OS_ENTER_CRITICAL();
cnt = pevent->OSEventCnt;
if (cnt > 0) { /* See if resource is available */
pevent->OSEventCnt--; /* Yes, decrement semaphore and notify caller */
}
OS_EXIT_CRITICAL();
return (cnt); /* Return semaphore count */
}
#endif
/*$PAGE*/
/*
************************************************
* CREATE A SEMAPHORE
*
* Description: This function creates a semaphore.
*
* Arguments : cnt is the initial value for the semaphore. If the value is 0, no resource is
* available (or no event has occurred). You initialize the semaphore to a
* non-zero value to specify how many resources are available (e.g. if you have
* 10 resources, you would initialize the semaphore to 10).
*
* Returns : != (void *)0 is a pointer to the event control clock (OS_EVENT) associated with the
* created semaphore
* == (void *)0 if no event control blocks were available
*******************************************
*/
OS_EVENT xdata *OSSemCreate (INT16U cnt)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
OS_EVENT xdata *pevent;
if (OSIntNesting > 0) { /* See if called from ISR ... */
return ((OS_EVENT *)0); /* ... can't CREATE from an ISR */
}
OS_ENTER_CRITICAL();
pevent = OSEventFreeList; /* Get next free event control block */
if (OSEventFreeList != (OS_EVENT *)0) { /* See if pool of free ECB pool was empty */
OSEventFreeList = (OS_EVENT *)OSEventFreeList->OSEventPtr;
}
OS_EXIT_CRITICAL();
if (pevent != (OS_EVENT *)0) { /* Get an event control block */
pevent->OSEventType = OS_EVENT_TYPE_SEM;
pevent->OSEventCnt = cnt; /* Set semaphore value */
pevent->OSEventPtr = (void *)0; /* Unlink from ECB free list */
OS_EventWaitListInit(pevent); /* Initialize to 'nobody waiting' on sem. */
}
return (pevent);
}
/*$PAGE*/
/*
*********************************************************************************************************
* DELETE A SEMAPHORE
*
* Description: This function deletes a semaphore and readies all tasks pending on the semaphore.
*
* Arguments : pevent is a pointer to the event control block associated with the desired
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 3
* semaphore.
*
* opt determines delete options as follows:
* opt == OS_DEL_NO_PEND Delete semaphore ONLY if no task pending
* opt == OS_DEL_ALWAYS Deletes the semaphore even if tasks are waiting.
* In this case, all the tasks pending will be readied.
*
* err is a pointer to an error code that can contain one of the following values:
* OS_NO_ERR The call was successful and the semaphore was deleted
* OS_ERR_DEL_ISR If you attempted to delete the semaphore from an ISR
* OS_ERR_INVALID_OPT An invalid option was specified
* OS_ERR_TASK_WAITING One or more tasks were waiting on the semaphore
* OS_ERR_EVENT_TYPE If you didn't pass a pointer to a semaphore
* OS_ERR_PEVENT_NULL If 'pevent' is a NULL pointer.
*
* Returns : pevent upon error
* (OS_EVENT *)0 if the semaphore was successfully deleted.
*
* Note(s) : 1) This function must be used with care. Tasks that would normally expect the presence of
* the semaphore MUST check the return code of OSSemPend().
* 2) OSSemAccept() callers will not know that the intended semaphore has been deleted unless
* they check 'pevent' to see that it's a NULL pointer.
* 3) This call can potentially disable interrupts for a long time. The interrupt disable
* time is directly proportional to the number of tasks waiting on the semaphore.
* 4) Because ALL tasks pending on the semaphore will be readied, you MUST be careful in
* applications where the semaphore is used for mutual exclusion because the resource(s)
* will no longer be guarded by the semaphore.
*/
#if OS_SEM_DEL_EN > 0
OS_EVENT xdata *OSSemDel (OS_EVENT xdata*pevent, INT8U opt, INT8U xdata *err)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
BOOLEAN tasks_waiting;
if (OSIntNesting > 0) { /* See if called from ISR ... */
*err = OS_ERR_DEL_ISR; /* ... can't DELETE from an ISR */
return (pevent);
}
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Validate 'pevent' */
*err = OS_ERR_PEVENT_NULL;
return (pevent);
}
if (pevent->OSEventType != OS_EVENT_TYPE_SEM) { /* Validate event block type */
*err = OS_ERR_EVENT_TYPE;
return (pevent);
}
#endif
OS_ENTER_CRITICAL();
if (pevent->OSEventGrp != 0x00) { /* See if any tasks waiting on semaphore */
tasks_waiting = TRUE; /* Yes */
} else {
tasks_waiting = FALSE; /* No */
}
switch (opt) {
case OS_DEL_NO_PEND: /* Delete semaphore only if no task waiting */
if (tasks_waiting == FALSE) {
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 4
pevent->OSEventType = OS_EVENT_TYPE_UNUSED;
pevent->OSEventPtr = OSEventFreeList; /* Return Event Control Block to free list */
OSEventFreeList = pevent; /* Get next free event control block */
OS_EXIT_CRITICAL();
*err = OS_NO_ERR;
return ((OS_EVENT *)0); /* Semaphore has been deleted */
} else {
OS_EXIT_CRITICAL();
*err = OS_ERR_TASK_WAITING;
return (pevent);
}
case OS_DEL_ALWAYS: /* Always delete the semaphore */
while (pevent->OSEventGrp != 0x00) { /* Ready ALL tasks waiting for semaphore */
OS_EventTaskRdy(pevent, (void *)0, OS_STAT_SEM);
}
pevent->OSEventType = OS_EVENT_TYPE_UNUSED;
pevent->OSEventPtr = OSEventFreeList; /* Return Event Control Block to free list */
OSEventFreeList = pevent; /* Get next free event control block */
OS_EXIT_CRITICAL();
if (tasks_waiting == TRUE) { /* Reschedule only if task(s) were waiting */
OS_Sched(); /* Find highest priority task ready to run */
}
*err = OS_NO_ERR;
return ((OS_EVENT *)0); /* Semaphore has been deleted */
default:
OS_EXIT_CRITICAL();
*err = OS_ERR_INVALID_OPT;
return (pevent);
}
}
#endif
/*$PAGE*/
/*
**********************************************************
* PEND ON SEMAPHORE
*
* Description: This function waits for a semaphore.
*
* Arguments : pevent is a pointer to the event control block associated with the desired
* semaphore.
*
* timeout is an optional timeout period (in clock ticks). If non-zero, your task will
* wait for the resource up to the amount of time specified by this argument.
* If you specify 0, however, your task will wait forever at the specified
* semaphore or, until the resource becomes available (or the event occurs).
*
* err is a pointer to where an error message will be deposited. Possible error
* messages are:
*
* OS_NO_ERR The call was successful and your task owns the resource
* or, the event you are waiting for occurred.
* OS_TIMEOUT The semaphore was not received within the specified
* timeout.
* OS_ERR_EVENT_TYPE If you didn't pass a pointer to a semaphore.
* OS_ERR_PEND_ISR If you called this function from an ISR and the result
* would lead to a suspension.
* OS_ERR_PEVENT_NULL If 'pevent' is a NULL pointer.
*
* Returns : none
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 5
***********
*/
void OSSemPend (OS_EVENT xdata *pevent, INT16U timeout, INT8U xdata *err)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
if (OSIntNesting > 0) { /* See if called from ISR ... */
*err = OS_ERR_PEND_ISR; /* ... can't PEND from an ISR */
return;
}
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Validate 'pevent' */
*err = OS_ERR_PEVENT_NULL;
return;
}
if (pevent->OSEventType != OS_EVENT_TYPE_SEM) { /* Validate event block type */
*err = OS_ERR_EVENT_TYPE;
return;
}
#endif
OS_ENTER_CRITICAL();
if (pevent->OSEventCnt > 0) { /* If sem. is positive, resource available ... */
pevent->OSEventCnt--; /* ... decrement semaphore only if positive. */
OS_EXIT_CRITICAL();
*err = OS_NO_ERR;
return;
}
/* Otherwise, must wait until event occurs */
OSTCBCur->OSTCBStat |= OS_STAT_SEM; /* Resource not available, pend on semaphore */
OSTCBCur->OSTCBDly = timeout; /* Store pend timeout in TCB */
OS_EventTaskWait(pevent); /* Suspend task until event or timeout occurs */
OS_EXIT_CRITICAL();
OS_Sched(); /* Find next highest priority task ready */
OS_ENTER_CRITICAL();
if (OSTCBCur->OSTCBStat & OS_STAT_SEM) { /* Must have timed out if still waiting for event*/
OS_EventTO(pevent);
OS_EXIT_CRITICAL();
*err = OS_TIMEOUT; /* Indicate that didn't get event within TO */
return;
}
OSTCBCur->OSTCBEventPtr = (OS_EVENT *)0;
OS_EXIT_CRITICAL();
*err = OS_NO_ERR;
}
/*$PAGE*/
/*
*****************************************************
* POST TO A SEMAPHORE
*
* Description: This function signals a semaphore
*
* Arguments : pevent is a pointer to the event control block associated with the desired
* semaphore.
*
* Returns : OS_NO_ERR The call was successful and the semaphore was signaled.
* OS_SEM_OVF If the semaphore count exceeded its limit. In other words, you have
* signalled the semaphore more often than you waited on it with either
* OSSemAccept() or OSSemPend().
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 6
* OS_ERR_EVENT_TYPE If you didn't pass a pointer to a semaphore
* OS_ERR_PEVENT_NULL If 'pevent' is a NULL pointer.
********************************************************
*/
INT8U OSSemPost (OS_EVENT xdata *pevent)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Validate 'pevent' */
return (OS_ERR_PEVENT_NULL);
}
if (pevent->OSEventType != OS_EVENT_TYPE_SEM) { /* Validate event block type */
return (OS_ERR_EVENT_TYPE);
}
#endif
OS_ENTER_CRITICAL();
if (pevent->OSEventGrp != 0x00) { /* See if any task waiting for semaphore */
OS_EventTaskRdy(pevent, (void *)0, OS_STAT_SEM); /* Ready highest prio task waiting on event */
OS_EXIT_CRITICAL();
OS_Sched(); /* Find highest priority task ready to run */
return (OS_NO_ERR);
}
if (pevent->OSEventCnt < 65535) { /* Make sure semaphore will not overflow */
pevent->OSEventCnt++; /* Increment semaphore count to register event */
OS_EXIT_CRITICAL();
return (OS_NO_ERR);
}
OS_EXIT_CRITICAL(); /* Semaphore value has reached its maximum */
return (OS_SEM_OVF);
}
/*$PAGE*/
/*
***********************************************
* QUERY A SEMAPHORE
*
* Description: This function obtains information about a semaphore
*
* Arguments : pevent is a pointer to the event control block associated with the desired
* semaphore
*
* pdata is a pointer to a structure that will contain information about the
* semaphore.
*
* Returns : OS_NO_ERR The call was successful and the message was sent
* OS_ERR_EVENT_TYPE If you are attempting to obtain data from a non semaphore.
* OS_ERR_PEVENT_NULL If 'pevent' is a NULL pointer.
*******************************************************************
*/
#if OS_SEM_QUERY_EN > 0
INT8U OSSemQuery (OS_EVENT xdata *pevent, OS_SEM_DATA xdata *ppdata)reentrant
{
#if OS_CRITICAL_METHOD == 3 /* Allocate storage for CPU status register */
OS_CPU_SR cpu_sr;
#endif
INT8U xdata *psrc;
INT8U xdata *pdest;
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 7
#if OS_ARG_CHK_EN > 0
if (pevent == (OS_EVENT *)0) { /* Validate 'pevent' */
return (OS_ERR_PEVENT_NULL);
}
if (pevent->OSEventType != OS_EVENT_TYPE_SEM) { /* Validate event block type */
return (OS_ERR_EVENT_TYPE);
}
#endif
OS_ENTER_CRITICAL();
ppdata->OSEventGrp = pevent->OSEventGrp; /* Copy message mailbox wait list */
psrc = &pevent->OSEventTbl[0];
pdest = &ppdata->OSEventTbl[0];
#if OS_EVENT_TBL_SIZE > 0
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 1
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 2
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 3
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 4
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 5
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 6
*pdest++ = *psrc++;
#endif
#if OS_EVENT_TBL_SIZE > 7
*pdest = *psrc;
#endif
ppdata->OSCnt = pevent->OSEventCnt; /* Get semaphore count */
OS_EXIT_CRITICAL();
return (OS_NO_ERR);
}
#endif /* OS_SEM_QUERY_EN */
#endif /* OS_SEM_EN */
MODULE INFORMATION: STATIC OVERLAYABLE
CODE SIZE = ---- ----
CONSTANT SIZE = ---- ----
XDATA SIZE = ---- ----
PDATA SIZE = ---- ----
DATA SIZE = ---- ----
IDATA SIZE = ---- ----
BIT SIZE = ---- ----
END OF MODULE INFORMATION.
C51 COMPILER V7.50 OS_SEM 05/17/2007 19:18:11 PAGE 8
C51 COMPILATION COMPLETE. 0 WARNING(S), 0 ERROR(S)
非常好我支持^.^
(0) 0%
不好我反对
(0) 0%
下载地址
UCOS移植在MCU8051 LARGE模式的源代码下载下载
相关电子资料下载
- stm32移植ucos iii教程 29
- 谈谈MCU看门狗任务优先级设置 211
- 到底该把喂狗任务优先级设置成最高还是最低好？ 375
- uC/OS-II内存管理方法详解 481
- uCOS-II系统移植 1619
- 什么是ucosii任务的调度原理和实现 943
- STM32入门学习笔记之uCOS-II系统移植4 549
- STM32入门学习笔记之uCOS-II系统移植3 257
- STM32入门学习笔记之uCOS-II系统移植2 843
- STM32入门学习笔记之uCOS-II系统移植1 1559