资料介绍
Common Panel Meter Setup Problems
General notes
When a person is setting up an instrument a commonly occurring problem is that
the functions they wish to alter do not appear on the display. If this happens the
likely cause of the problem is the setting of the “special function” (SPFN),
sometimes called the “remote input function” (R.INP). If this is set to “No
Program Access” (NO.Ac) or “Setpoint Access Only” (SP.Ac) then access to
functions will either not be allowed, or will be limited. To check the “special
function” setting and obtain access to the functions place a wire link between the
instruments external input (normally labeled “EXT-IN” on the electrical installation
diagram) and ground. This link is sometimes made via a key switch. With the link
in position access to the functions is now possible. When the link is removed the
access reverts to the “special function” access setting.
When setting up the instrument it is important to note that if the instrument is left in
the function mode for too long it will “time out” and revert to normal measuring
mode.
Upon power being applied to the instrument a “switch on” or “wake up” display
routine takes place. This typically comprises an LED test (****) followed by
factory and software version identification messages and finally a “live” reading
from the input sensor or test input. This routine is normal and should not be taken
as indicating a fault.
General notes
When a person is setting up an instrument a commonly occurring problem is that
the functions they wish to alter do not appear on the display. If this happens the
likely cause of the problem is the setting of the “special function” (SPFN),
sometimes called the “remote input function” (R.INP). If this is set to “No
Program Access” (NO.Ac) or “Setpoint Access Only” (SP.Ac) then access to
functions will either not be allowed, or will be limited. To check the “special
function” setting and obtain access to the functions place a wire link between the
instruments external input (normally labeled “EXT-IN” on the electrical installation
diagram) and ground. This link is sometimes made via a key switch. With the link
in position access to the functions is now possible. When the link is removed the
access reverts to the “special function” access setting.
When setting up the instrument it is important to note that if the instrument is left in
the function mode for too long it will “time out” and revert to normal measuring
mode.
Upon power being applied to the instrument a “switch on” or “wake up” display
routine takes place. This typically comprises an LED test (****) followed by
factory and software version identification messages and finally a “live” reading
from the input sensor or test input. This routine is normal and should not be taken
as indicating a fault.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- 基于Glucose Meter Demonstration微控制器的参考设计 0次下载
- 基于Blood Pressure Meter Demonstration微控制器的参考设计 9次下载
- stc-isp-v2.9-setup-beta5安装入口 9次下载
- Flat Panel Display Controller 4次下载
- pdf_setup 0次下载
- net_framwork_setup 9次下载
- Frequency Meter 0次下载
- Molex_Consumer_PDP_and_TV_Panel 0次下载
- 2007office安装setup 9次下载
- ADIsimPLL_V3_43_04_setup 103次下载
- Setup_JlinkARM_V420 9次下载
- Programming Teridian Meter ICs 33次下载
- 仪表校准程序(Meter Calibration Procedures) 30次下载
- DVB COMMON SCRAMBLING ALGORITH 35次下载
- Common Mode Voltage 22次下载
- 为什么三维视图中不显示PCB三维模型? 3195次阅读
- 在高速电路设计中候PCB布线的损耗解决方案 914次阅读
- 为什么setup检查下一个沿而hold检查当前沿 2720次阅读
- 不同VT cell的delay差异 2681次阅读
- setup/hold的概念 1422次阅读
- 微雪电子太阳能板Solar Panel简介 2484次阅读
- 在贴片加工厂中有哪些安全防护需要了解 1197次阅读
- 复合放大器实现高精度的高输出驱动能力 获得最佳的性能 1467次阅读
- 信步科技SV1-19016T主板规格 1133次阅读
- 信步科技SV1-19016EP规格英文版 951次阅读
- 用降压型稳压器或线性稳压器电源时值来会为负载供电 872次阅读
- 简析触控式面板(Touch Panel)技术 6792次阅读
- Mozilla基金会发起的Common Voice项目,发布新版语音识别数据集 3449次阅读
- 我们如何来修复setup violation? 1.7w次阅读
- 田洪川VS2005视频教程:容器Panel 580次阅读
下载排行
本周
- 1东芝BiCD集成电路硅单片TB67S109AFNAG数据手册
- 1.93 MB | 5次下载 | 免费
- 2SP3060A/30120A/30160A/30320A/30520A系列数字合成扫频仪使用说明书
- 4.16 MB | 3次下载 | 1 积分
- 3具有双通道 DC-DC转换器、由串行接口控制的9通道电机驱动器TPIC2010数据表
- 1.15MB | 2次下载 | 免费
- 4USB Type-C PD快充协议智能触发芯片FS312B数据手册
- 0.75 MB | 1次下载 | 免费
- 5USB Type_C PD快充协议智能触发芯片FS8025B数据手册
- 1.29 MB | 1次下载 | 免费
- 6触摸按键PCB 设计要点V01
- 1.42 MB | 1次下载 | 免费
- 75V升压充电两串锂电池充电管理IC FS4058数据手册
- 2.98 MB | 次下载 | 免费
- 8真关断同步升压IC FS2009数据手册
- 2.08 MB | 次下载 | 免费
本月
- 1DCDC原理详解
- 0.98 MB | 63次下载 | 免费
- 2allegro快速入门教程
- 1.98 MB | 36次下载 | 免费
- 3FU-7(807)胆机原理图
- 11.93 MB | 25次下载 | 1 积分
- 4用于汽车应用的高压电源管理IC TPS65311-Q1数据表
- 1.05MB | 22次下载 | 免费
- 5电子元件基础知识介绍
- 8.76 MB | 13次下载 | 2 积分
- 6华为海思Ascend 310芯片的资料说明
- 0.12 MB | 10次下载 | 10 积分
- 7GD32F10x系列MCU用户手册
- 11.5MB | 9次下载 | 免费
- 86A 输出电流同步降压稳压器TPS65286数据表
- 2.05MB | 6次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935083次下载 | 免费
- 2开源硬件-PMP21529.1-4 开关降压/升压双向直流/直流转换器 PCB layout 设计
- 1.48MB | 420045次下载 | 免费
- 3Altium DXP2002下载入口
- 未知 | 233067次下载 | 免费
- 4电路仿真软件multisim 10.0免费下载
- 340992 | 191308次下载 | 免费
- 5十天学会AVR单片机与C语言视频教程 下载
- 158M | 183308次下载 | 免费
- 6labview8.5下载
- 未知 | 81567次下载 | 免费
- 7Keil工具MDK-Arm免费下载
- 0.02 MB | 73785次下载 | 免费
- 8NI LabVIEW中实现3D视觉的工具和技术
- 未知 | 70088次下载 | 免费
评论
查看更多