资料介绍
TIA/EIA Engineering Standards and Publications are designed to serve the public interest through eliminating misunderstandings between manufacturers and purchasers, facilitating interchangeability and improvement of products, and assisting the purchaser in selecting and obtaining with minimum delay the proper product for his particular need. Existence of such Standards and Publications shall not in any respect preclude any member or nonmember of TIA/EIA from manufacturing or selling products not conforming to such Standards and Publications,nor shall the existence of such Standards and Publications preclude their voluntary use by those other than TIA/EIA members, whether the standard is to be used either domestically or internationally.
1 The technical requirements contained in cdma2000 form a compatibility standard for Code
2 Division Multiple Access (CDMA) systems. They ensure that mobile stations manufactured
3 in accordance with this standard can obtain service from a system manufactured in
4 accordance with this standard. These requirements do not address the quality or reliability
5 of that service, nor do they cover equipment performance or measurement procedures.
6 To ensure compatibility (see Note 1), both radio-system parameters and call-processing
7 procedures must be specified. The sequence of call-processing steps that the mobile
8 stations and base stations execute to establish calls has been specified along with the
9 digital control messages and analog signals that are exchanged between the two stations.
10 The base station is subject to fewer compatibility requirements than the dual-mode mobile
11 station. Radiated power levels, both desired and undesired, are fully specified for dual12
mode mobile stations to control the RF interference that one mobile station can cause
13 another. Base stations are fixed in location and their interference is controlled by proper
14 layout and operation of the system in which the station operates. Detailed call-processing
15 procedures are specified for mobile stations to ensure a uniform response to all base
16 stations. Base station call procedures are not specified in detail because they are a part of
17 the overall design of the individual system. However, the base station call-processing
18 procedures must be compatible with those specified for the mobile station. This approach
19 to writing the compatibility specification provides the system designer with sufficient
20 flexibility to respond to local service needs and to account for local topography and
21 propagation conditions.
22 This specification includes provisions for future service additions and expansion of system
23 capabilities.
24 This standard is divided into multiple parts. This part details the Layer 3 call processing
25 and procedures.
1 The technical requirements contained in cdma2000 form a compatibility standard for Code
2 Division Multiple Access (CDMA) systems. They ensure that mobile stations manufactured
3 in accordance with this standard can obtain service from a system manufactured in
4 accordance with this standard. These requirements do not address the quality or reliability
5 of that service, nor do they cover equipment performance or measurement procedures.
6 To ensure compatibility (see Note 1), both radio-system parameters and call-processing
7 procedures must be specified. The sequence of call-processing steps that the mobile
8 stations and base stations execute to establish calls has been specified along with the
9 digital control messages and analog signals that are exchanged between the two stations.
10 The base station is subject to fewer compatibility requirements than the dual-mode mobile
11 station. Radiated power levels, both desired and undesired, are fully specified for dual12
mode mobile stations to control the RF interference that one mobile station can cause
13 another. Base stations are fixed in location and their interference is controlled by proper
14 layout and operation of the system in which the station operates. Detailed call-processing
15 procedures are specified for mobile stations to ensure a uniform response to all base
16 stations. Base station call procedures are not specified in detail because they are a part of
17 the overall design of the individual system. However, the base station call-processing
18 procedures must be compatible with those specified for the mobile station. This approach
19 to writing the compatibility specification provides the system designer with sufficient
20 flexibility to respond to local service needs and to account for local topography and
21 propagation conditions.
22 This specification includes provisions for future service additions and expansion of system
23 capabilities.
24 This standard is divided into multiple parts. This part details the Layer 3 call processing
25 and procedures.
下载该资料的人也在下载
下载该资料的人还在阅读
更多 >
- cdma2000扩频模拟信令标准频谱系统 0次下载
- 3G基础的UMTS和CDMA2000课件说明 24次下载
- CDMA2000下行链路定点仿真 27次下载
- 基于IP架构的CDMA2000系统A接口协议的设计 10次下载
- 3G移动网--WCDMA和CDMA2000 115次下载
- IPSec在CDMA2000分组数据服务节点中的应用 26次下载
- 第一讲 cdma2000系列的特点 3次下载
- CDMA2000-1X系统技术讲座介绍 0次下载
- CDMA2000 1X EV-DO网络技术电子版图 0次下载
- CDMA2000 1x EV-DO网络技术-第7章 18次下载
- CDMA2000 1x网络引入WLAN接入 14次下载
- 基于IP架构的cdma2000 1x系统TrFO特性的设计与 18次下载
- CDMA2000无线传输技术 25次下载
- WCDMA R99 与cdma2000 1X 分组域的比较 20次下载
- 一种CDMA2000系统的位置管理优化技术 21次下载
- 基于EPM7256AETC100-5实现CDMA2000 BTS时钟同步的应用解决方案 2199次阅读
- 基于1xEV-DO技术研发移动终端和两种生产测试方法对比分析 2848次阅读
- 采用CTC6048与88E1340芯片实现三层全千兆路由交换机的设计 5016次阅读
- Ping的三层网络检测方法 2905次阅读
- 三层交换技术的原理_三层交换技术的基本原理_三层交换技术的工作原理 1.1w次阅读
- 三层交换技术概念_三层交换技术的特点 1.1w次阅读
- 三层交换机配置实例详解 11w次阅读
- 通信网络三层转发工作原理及案例 2.2w次阅读
- 普通路由器和二、三层交换机的不同 2267次阅读
- 两种基带射频接口协议介绍及基本工作原理分析 8273次阅读
- 在网络演进中优化CDMA2000 860次阅读
- 手机射频技术和手机射频模块构成简介 2.1w次阅读
- TCP协议、算法和原理的介绍 5093次阅读
- 技术揭秘:如何解决iPhone 4S信号接收灵敏度问题? 2.4w次阅读
- CDMA系统中的功率控制技术及过程分析 896次阅读
下载排行
本周
- 1电子电路原理第七版PDF电子教材免费下载
- 0.00 MB | 1491次下载 | 免费
- 2单片机典型实例介绍
- 18.19 MB | 95次下载 | 1 积分
- 3S7-200PLC编程实例详细资料
- 1.17 MB | 27次下载 | 1 积分
- 4笔记本电脑主板的元件识别和讲解说明
- 4.28 MB | 18次下载 | 4 积分
- 5开关电源原理及各功能电路详解
- 0.38 MB | 11次下载 | 免费
- 6100W短波放大电路图
- 0.05 MB | 4次下载 | 3 积分
- 7基于单片机和 SG3525的程控开关电源设计
- 0.23 MB | 4次下载 | 免费
- 8基于AT89C2051/4051单片机编程器的实验
- 0.11 MB | 4次下载 | 免费
本月
- 1OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 2PADS 9.0 2009最新版 -下载
- 0.00 MB | 66304次下载 | 免费
- 3protel99下载protel99软件下载(中文版)
- 0.00 MB | 51209次下载 | 免费
- 4LabView 8.0 专业版下载 (3CD完整版)
- 0.00 MB | 51043次下载 | 免费
- 5555集成电路应用800例(新编版)
- 0.00 MB | 33562次下载 | 免费
- 6接口电路图大全
- 未知 | 30320次下载 | 免费
- 7Multisim 10下载Multisim 10 中文版
- 0.00 MB | 28588次下载 | 免费
- 8开关电源设计实例指南
- 未知 | 21539次下载 | 免费
总榜
- 1matlab软件下载入口
- 未知 | 935053次下载 | 免费
- 2protel99se软件下载(可英文版转中文版)
- 78.1 MB | 537793次下载 | 免费
- 3MATLAB 7.1 下载 (含软件介绍)
- 未知 | 420026次下载 | 免费
- 4OrCAD10.5下载OrCAD10.5中文版软件
- 0.00 MB | 234313次下载 | 免费
- 5Altium DXP2002下载入口
- 未知 | 233046次下载 | 免费
- 6电路仿真软件multisim 10.0免费下载
- 340992 | 191183次下载 | 免费
- 7十天学会AVR单片机与C语言视频教程 下载
- 158M | 183277次下载 | 免费
- 8proe5.0野火版下载(中文版免费下载)
- 未知 | 138039次下载 | 免费
评论
查看更多