资料大小: 0.38 MB

所需积分: 0


用户评论: 0条评论,查看

上传日期: 2017-10-18

上 传 者: 李倩他上传的所有资料



  The ADE7755 is a high accuracy electrical energy measurement IC. The part specificaTIons surpass the accuracy requirements as quoted in the IEC 1036 standard. The only analog circuitry used in the ADE7755 is in the ADCs and reference circuit. All other signal processing (for example, mulTIplicaTIon and filtering) is carried out in the digital domain. This approach provides superior stability and accuracy over extremes in environmental condiTIons and over time. The ADE7755 supplies average active power information on the low frequency outputs, F1 and F2. These logic outputs can be used to directly drive an electromechanical counter or interface to an MCU. The CF logic output gives instantaneous active power information. This output is intended to be used for calibration purposes or for interfacing to an MCU. The ADE7755 includes a power supply monitoring circuit on the AVDD supply pin. The ADE7755 remains in a reset condition until the supply voltage on AVDD reaches 4 V. If the supply falls below 4 V, the ADE7755 resets and no pulse is issued on F1, F2, and CF. Internal phase matching circuitry ensures that the voltage and current channels are phase matched whether the HPF in Channel 1 is on or off. An internal no load threshold ensures that the ADE7755 does not exhibit any creep when there is no load. The ADE7755 is available in a 24-lead SSOP package.


查看全部 条评论

发表评论请先 , 还没有账号?免费注册


技术交流、我要发言! 发表评论可获取积分! 请遵守相关规定。