|
|
| 软件名称 |
SG3525A pdf datasheet (Pulse Width Modulator Control Circuit) |
| 运行环境 |
Win9X/Win2000/WinXP/Win2003/ |
|
| 整理时间 |
2008-10-22 17:49:46 |
| 软件星级 |
 |
| 软件语言 |
简体中文 |
| 软件类型 |
国产软件 |
| 授权方式 |
共享软件 |
| 软件大小 |
666 KB |
| 相关连接 |
csb23@126.com 官方主页 没有预览图片
[收 藏] |
| 下载统计 |
|
| 解压密码 |
www.elecfans.com |
|
 软件简介 |
SG3525A Pulse Width Modulator Control Circuit
The SG3525A pulse width modulator control circuit offers
improved performance and lower external parts count when
implemented for controlling all types of switching power supplies.
The on−chip +5.1 V reference is trimmed to 1% and the error
amplifier has an input common−mode voltage range that includes the
reference voltage, thus eliminating the need for external divider
resistors. A sync input to the oscillator enables multiple units to be
slaved or a single unit to be synchronized to an external system clock.
A wide range of deadtime can be programmed by a single resistor
connected between the CT and Discharge pins. This device also
features built−in soft−start circuitry, requiring only an external timing
capacitor. A shutdown pin controls both the soft−start circuitry and the
output stages, providing instantaneous turn off through the PWM latch
with pulsed shutdown, as well as soft−start recycle with longer
shutdown commands. The under voltage lockout inhibits the outputs
and the changing of the soft−start capacitor when VCC is below
nominal. The output stages are totem−pole design capable of sinking
and sourcing in excess of 200 mA. The output stage of the SG3525A
features NOR logic resulting in a low output for an off−state.
|
| ∷软件评论∷ （评论内容只代表网友观点，与本站立场无关！）
更多评论... |
|
|
| ∷下载说明∷ |
* 为了达到最快的下载速度，推荐使用[网际快车]下载本站软件。
* 请一定升级到最新版[WinRAR3.5]才能正常解压本站提供的软件!
* 如果您发现该软件不能下载，请点击报告错误谢谢！
* 站内提供的所有软件包含破解及注册码均是由网上搜集，若侵犯了你的版权利益，敬请来信通知我们! |
|
