|
|
| 软件名称 |
CY7C1041 pdf,CY7C1041 datasheet |
| 运行环境 |
Win9X/Win2000/WinXP/Win2003/ |
|
| 整理时间 |
2008-9-6 0:27:52 |
| 软件星级 |
 |
| 软件语言 |
简体中文 |
| 软件类型 |
国产软件 |
| 授权方式 |
共享软件 |
| 软件大小 |
666 KB |
| 相关连接 |
csb23@126.com 官方主页 没有预览图片
[收 藏] |
| 下载统计 |
|
| 解压密码 |
www.elecfans.com |
|
 软件简介 |
The CY7C1041B is a high-performance CMOS static RAM organized
as 262,144 words by 16 bits.
Writing to the device is accomplished by taking Chip Enable
(CE) and Write Enable (WE) inputs LOW. If Byte Low Enable
(BLE) is LOW, then data from I/O pins (I/O0 through I/O7), is
written into the location specified on the address pins (A0
through A17). If Byte High Enable (BHE) is LOW, then data
from I/O pins (I/O8 through I/O15) is written into the location
specified on the address pins (A0 through A17).
Reading from the device is accomplished by taking Chip Enable
(CE) and Output Enable (OE) LOW while forcing the Write
Enable (WE) HIGH. If Byte Low Enable (BLE) is LOW, then
data from the memory location specified by the address pins
will appear on I/O0 to I/O7. If Byte High Enable (BHE) is LOW,
then data from memory will appear on I/O8 to I/O15. See the
truth table at the back of this data sheet for a complete des cription
of read and write modes.
The input/output pins (I/O0 through I/O15) are placed in a
high-impedance state when the device is deselected (CE
HIGH), the outputs are disabled (OE HIGH), the BHE and BLE
are disabled (BHE, BLE HIGH), or during a write operation (CE
LOW, and WE LOW).
The CY7C1041B is available in a standard 44-pin
400-mil-wide body width SOJ and 44-pin TSOP II package
with center power and ground (revolutionary) pinout.
|
| ∷软件评论∷ （评论内容只代表网友观点，与本站立场无关！）
更多评论... |
|
|
| ∷下载说明∷ |
* 为了达到最快的下载速度，推荐使用[网际快车]下载本站软件。
* 请一定升级到最新版[WinRAR3.5]才能正常解压本站提供的软件!
* 如果您发现该软件不能下载，请点击报告错误谢谢！
* 站内提供的所有软件包含破解及注册码均是由网上搜集，若侵犯了你的版权利益，敬请来信通知我们! |
|
