|
|
| 软件名称 |
AD831 pdf datasheet (High-Performance, Low Distortion 500-MHz Mixer) |
| 运行环境 |
Win9X/Win2000/WinXP/Win2003/ |
|
| 整理时间 |
2008-8-14 9:28:12 |
| 软件星级 |
 |
| 软件语言 |
简体中文 |
| 软件类型 |
国产软件 |
| 授权方式 |
共享软件 |
| 软件大小 |
666 KB |
| 相关连接 |
csb23@126.com 官方主页 没有预览图片
[收 藏] |
| 下载统计 |
|
| 解压密码 |
www.elecfans.com |
|
 软件简介 |
The AD831 is a low distortion, wide dynamic range, monolithic mixer for use in such applications as RF to IF downconversion in HF and VHF receivers, the second mixer in DMR base stations,
direct-to-baseband conversion, quadrature modulation and demodulation, and doppler shift detection in ultrasound imaging applications. The mixer includes an LO driver and a low noise output amplifier and provides both user-programmable power consumption and third order intercept point.
The AD831 provides a +24 dBm third order intercept point for –10 dBm LO power, thus improving system performance and reducing system cost compared to passive mixers, by eliminating the need for a high power LO driver and its attendant shielding and isolation problems.
The RF, IF, and LO ports may be dc or ac coupled when the mixer is operating from ±5 V supplies or ac coupled when operating
from a single-supply of 9 V minimum. The mixer operates with RF and LO inputs as high as 500 MHz.
The mixer’s IF output is available as either a differential current output or a single-ended voltage output. The differential output is from a pair of open collectors and may be ac coupled via a transformer
or capacitor to provide a 250 MHz output bandwidth. In downconversion applications, a single capacitor connected across these outputs implements a low-pass filter to reduce harmonics directly at the mixer core, simplifying output filtering. When building a quadrature-amplitude modulator or image reject mixer, the differential current outputs of two AD831s may be summed by connecting them together.
An integral low noise amplifier provides a single-ended voltage output and can drive such low impedance loads as filters, 50 amplifier inputs, and A/D converters. Its small signal bandwidth exceeds 200 MHz. A single resistor connected between pins OUT and FB sets its gain. The amplifier’s low dc offset allows its use in such direct-coupled applications as direct-to-baseband conversion and quadrature-amplitude demodulation.
The mixer’s SSB noise figure is 10.3 dB at 70 MHz using its output amplifier and optimum source impedance. Unlike passive mixers, the AD831 has no insertion loss and does not require an external diplexer or passive termination.
A programmable-bias feature allows the user to reduce power consumption, with a reduction in the 1 dB compression point and third-order intercept. This permits a tradeoff between dynamic range and power consumption. For example, the AD831 may be used as a second mixer in cellular and two-way radio base stations at reduced power while still providing a substantial performance improvement over passive solutions.
PRODUCT HIGHLIGHTS
1. –10 dBm LO Drive for a +24 dBm Output Referred Third Order Intercept Point
2. Single-Ended Voltage Output
3. High Port-to-Port Isolation
4. No Insertion Loss
5. Single- or Dual-Supply Operation
6. 10.3 dB Noise Figure
|
| ∷软件评论∷ （评论内容只代表网友观点，与本站立场无关！）
更多评论... |
|
|
| ∷下载说明∷ |
* 为了达到最快的下载速度，推荐使用[网际快车]下载本站软件。
* 请一定升级到最新版[WinRAR3.5]才能正常解压本站提供的软件!
* 如果您发现该软件不能下载，请点击报告错误谢谢！
* 站内提供的所有软件包含破解及注册码均是由网上搜集，若侵犯了你的版权利益，敬请来信通知我们! |
|
