电子发烧友App
TI公司的CC2642R是SimpleLink™ Bluetooth® 5低功耗无线MCU，具有成本效率超低功耗，2.4GHz和亚GHz RF器件，具有非常低的工作RF和微处理器（MCU）电流，以及亚μA睡眠电流和高达80KB奇偶保护的RAM，具有极好电池寿命，允许用小型钮扣电池工作，可在能量收获中应用.CC2642R组合了灵活非常低的RF收发器和功能强大的48MHz Arm® Cortex®-M4F CPU，支持多种物理层和RF标准。专用的无线电控制器（Arm® Cortex®-M0）处理存储在ROM或RAM的低级射频（RF）协议指令，因此保证了超低功耗，并具有极大灵活性.CC2642R是包含了完整的RF系统和片上DC/DC转换器的高度集成的真正单片解决方案，具有极好的灵敏度和鲁棒性能（灵敏度和阻塞度）。工作电压1.8 V 到 3.8 V，主要用在消费类电子，手机附件，运动和健美设备，HID应用，医疗设备，智能电网和自动化仪表，家庭和建筑物自动化，无线告警和安全系统，工业监测和控制，无线健康应用，无线传感器网络，有源RFID，能量收集应用，长距离传感器应用和电子货架标签（ESL）。本文介绍了CC2642R主要特性，功能框图，以及SimpleLink™ CC26x2R无线MCU LaunchPad™开发板主要特性，电路图和材料清单与PCB设计图。
The CC2642R device is a member of the SimpleLink™ MCU platform of cost-effective， ultra-low power，2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller （MCU） currents， in additionto sub-μA sleep current with up to 80KB of parity protected RAM retention， provide excellent batterylifetime and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC2642R device combines a flexible， very low-power RF transceiver with a powerful 48 MHz Arm®Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated RadioController （Arm® Cortex®-M0） handles low-level RF protocol commands that are stored in ROM or RAM，thus ensuring ultra-low power and great flexibility. The low power consumption of the CC2642R devicedoes not come at the expense of RF performance; the CC2642R device has excellent sensitivity androbustness （selectivity and blocking） performance.
The CC2642R device is a highly integrated， true single-chip solution incorporating a complete RF systemand an on-chip DC/DC converter.
Sensors can be handled in a very low-power manner by a programmable， autonomous ultra-low powerSensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller， with its fastwake-up and ultra-low-power 2 MHz mode is designed for sampling， buffering， and processing bothanalog and digital sensor data; thus the MCU system can maximize sleep time and reduce active power.
The CC2642R device is part of the SimpleLink™ microcontroller （MCU） platform， which consists ofWi-Fi®， Bluetooth® Low Energy， Thread， Zigbee， Sub-1 GHz MCUs， and host MCUs， which all share acommon， easy-to-use development environment with a single core software development kit （SDK） andrich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of theportfolio’s devices into your design， allowing 100 percent code reuse when your design requirementschange.
CC2642R主要特性：
• Microcontroller
– Powerful 48-MHz Arm® Cortex®-M4F Processor
– EEMBC CoreMark® score： 148
– 352KB of in-system Programmable Flash
– 256KB of ROM for protocols and libraryfunctions
– 8KB of Cache SRAM （Alternatively available asgeneral-purpose RAM）
– 80KB of ultra-low leakage SRAM with parity
– 2-Pin cJTAG and JTAG debugging
– Supports Over-the-Air upgrade （OTA）
• Ultra-Low Power Sensor Controller with 4KB ofSRAM
– Sample， store， and process sensor data
– Operation independent from system CPU
– Fast wake-up for low-power operation
• TI-RTOS， drivers， Bootloader， Bluetooth® 5 LowEnergy Controller in ROM for optimized applicationsize
• RoHS-compliant package
– 7-mm × 7-mm RGZ VQFN48 （31 GPIOs）
• Peripherals
– Digital peripherals can be routed to any GPIO
– 4× 32-bit or 8× 16-bit general-purpose timers
– 12-Bit ADC， 200 kSamples/s， 8 channels
– 2× comparators with internal reference DAC（1× continuous time， 1× ultra-low power）
– Programmable current source
– 2× UART
– 2× SSI （SPI， MICROWIRE， TI）
– I2C
– I2S
– Real-Time Clock （RTC）
– AES 128- and 256-bit Crypto Accelerator
– ECC and RSA Public Key Hardware Accelerator
– SHA2 Accelerator （Full suite up to SHA-512）
– True Random Number Generator （TRNG）
– Capacitive sensing， up to 8 channels
– Integrated temperature and battery monitor
• External system
– On-chip Buck DC/DC Converter
• Low Power
– Wide supply voltage range： 1.8 V to 3.8 V
– Active-Mode RX： 6.9 mA
– Active-Mode TX 0 dBm： 7.3 mA
– Active-Mode TX 5 dBm： 9.6 mA
– Active-Mode MCU 48 MHz （CoreMark）：
3.4 mA （71 μA/MHz）
– Sensor Controller， Low Power-Mode， 2 MHz，running infinite loop： 30.8 μA
– Sensor Controller， Active-Mode， 24 MHz，running infinite loop： 808 μA
– Standby： 0.94 μA （RTC on， 80KB RAM andCPU retention）
– Shutdown： 150 nA （wakeup on external events）
• Radio section
– 2.4-GHz RF transceiver compatible withBluetooth 5 Low Energy
– Excellent receiver sensitivity：
–105 dBm for Bluetooth 125-kbps （LE CodedPHY）
–97 dBm for 1-Mbps PHY
– Output power up to +5 dBm with temperaturecompensation
– Suitable for systems targeting compliance withworldwide radio frequency regulations
– EN 300 328， （Europe）
– EN 300 440 Category 2
– FCC CFR47 Part 15
– ARIB STD-T66 （Japan）
• Development Tools and Software
– CC26x2 LaunchPad™ Development Kit
– SimpleLink™ CC13X2-CC26X2 SoftwareDevelopment Kit
– SmartRF™ Studio for simple radio configuration
– Sensor Controller Studio for building low-powersensing applications
CC2642R应用：
• Consumer electronics
• Mobile phone accessories
• Sports and fitness equipment
• HID applications
• Medical
• Smart grid and automatic meter reading
• Home and building automation
• Wireless alarm and security systems
• Industrial monitoring and control
• Wireless healthcare applications
• Wireless sensor networks
• Active RFID
• Energy harvesting applications
• Electronic Shelf Label （ESL）
• Long-range sensor applications
图1.CC2642R功能框图
图2.SimpleLink™ CC26x2R无线MCU LaunchPad™开发板外形图
图3.LaunchPad™开发板电路图（1）
图4.LaunchPad™开发板电路图（2）
图5.LaunchPad™开发板电路图（3）
图6.LaunchPad™开发板电路图（4）
图7.LaunchPad™开发板电路图（5）
图8.LaunchPad™开发板电路图（6）
图9.LaunchPad™开发板电路图（7）
图10.LaunchPad™开发板PCB设计图（1）
图11.LaunchPad™开发板PCB设计图（2）
图12.LaunchPad™开发板PCB设计图（3）
图13.LaunchPad™开发板PCB设计图（4）
图14.LaunchPad™开发板PCB设计图（5）
图15.LaunchPad™开发板PCB设计图（6）
图16.LaunchPad™开发板PCB设计图（7）
图17.LaunchPad™开发板PCB设计图（8）
图18.LaunchPad™开发板PCB设计图（9）
图19.LaunchPad™开发板PCB设计图（10）
工商网监
评论